low number 1903 conversion to 22 rim fire

[RCS]

My barrel has a Brownells 22 rim rifle barrel liner silver soldered to the bore - this is not a Numrich liner that can be removed. The idea was to be able to salvage burned-out barrels by installing a permanent 22 rim fire liner with a rear extension to fit the M2 bolt. The only common part to your kit is the M2 bolt !

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Mike Haas]

My barrel has a Brownells 22 rim rifle barrel liner silver soldered to the bore - this is not a Numrich liner that can be removed. The idea was to be able to salvage burned-out barrels by installing a permanent 22 rim fire liner with a rear extension to fit the M2 bolt. The only common part to your kit is the M2 bolt !

I appreciate your response. I was un-aware that Brownells offered such a barrel liner. I take it from your response that your conversion is a "single shot" as opposed to the Numerich Kit?.

[RCS]

You can also use the M2 clip and triggerguard as it will fit the 1903 receiver