The gun is one of the Canadianicon cut-ups rewelded. The lower may be a replacement...the photos don't show the detail back of the pistol grip. You also don't see the typical burn marks on the pistol grip. But you can see where the contours are lost just under the barrel nut. Shame whoever did it did not invest in a couple small grinding wheels to return most of the profile. What is impressive is that the bluing or park went on fairly evenly over the welded up area. Usually, due to the hardening of the welded area, or the different metal used in the weld, the repaired area reacts differently to the chemicals.

As mentioned already, you need the butt strap, and for originality could replace the front bipod with the extendable leg type.

Hopefully you have better self control than I did. Brens seem to be almost as addictive as Enfields.....you usually can't stop at just one.