-
Legacy Member
early 1903's
Here are some photos of SA serial number 160963 with a SA 2-07 dated barrel, not a conversion, just very early productionAttachment 66658Attachment 66659Attachment 66660Attachment 66661Attachment 66662Attachment 66663
-
Thank You to RCS For This Useful Post:
-
10-21-2015 08:41 AM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
RCS
Here are some photos of SA serial number 160963 with a SA 2-07 dated barrel, not a conversion, just very early production
Interesting, to still have the open bottom rear sight base and corresponding stock inletting. Very nice.
I actually have two early Springfield examples with 1905 serial number receivers and shortened SA-05-A barrels. But both versions have the solid sleeve rear sight base w/ routed stock.
-
FREE MEMBER
NO Posting or PM's Allowed
My stock has had some unfortunate stamp cancellations - but some things can't be helped. I know that many stocks were butchered in far worse ways.
It is quite easy to see that the inspector's initials, J.F.C. (J.F. Coyle, 1906-1907), are appropriate for the no-crossbolt stock.

But what is really bugging me is the name which is stamped on the left side, under the receiver. Civilian owner's name, VFW post name, officer's name, base name, armory name, U.S. Naval vessel name????? It just bugs me that I can't read it.
Perhaps someone has seen a similar stock stamp?
My best guess: T. G. M c L A S ? M ? N
-
Legacy Member
early Rock Island 1903
this early Rock Island s/n 64145 with RIA 3-07 barrelAttachment 66665Attachment 66666Attachment 66667
Note the square end on the rear sight slide
-
Thank You to RCS For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
-
Advisory Panel
You were holding out on us. That's a nice bayonet.
-
-
Legacy Member
Rifles with no stock bolts must indeed be Very hard to come by. I don't see them anywhere. There was THIS one though that was given to me as a birthday present back aways. This photo was taken before my wife had it sporterized and slicked up for me. She's real light and easy to handle now!
Attachment 66697
-
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
Fred G.
Rifles with no stock bolts must indeed be Very hard to come by. I don't see them anywhere. There was THIS one though that was given to me as a birthday present back aways. This photo was taken before my wife had it sporterized and slicked up for me. She's real light and easy to handle now!
Attachment 66697
Ha! You even drilled two holes in the front sight base before you chucked the extra lumber and railroad spike.
-
Legacy Member
You Betcha!
-
-
Advisory Panel

Originally Posted by
Fred G.
sporterized and slicked up
Pretty funny...always like to see that rifle Fred.
-
Thank You to browningautorifle For This Useful Post: