+ Reply to Thread
Results 1 to 10 of 10

Thread: Question on the finish on my '03

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    LeagleEagle's Avatar
    Join Date
    May 2009
    Last On
    08-03-2017 @ 08:04 PM
    Location
    Texas
    Posts
    411
    Local Date
    06-06-2024
    Local Time
    11:59 PM

    Question on the finish on my '03

    I bought this #996xxx, SA 10-18 barrel back in 2003. Doesn't seem to be a Greek return.
    Was changing the stock today and noticed (for the first time) the barrel seems to have a matte finish under the handguards and front barrel band, but shiny like the receiver else where. doesnt look like paint. Was just curious as to why the different finishes.





    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by LeagleEagle; 08-13-2010 at 08:11 PM.

  2. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    06-06-2024
    Local Time
    11:59 PM
    If that isn't some type of dried sprayed on oil it must be rust. Looks like the rifle was stored in a place where there were big temperature swings causing the rifle to attract condensation and rust.
    The area under the front band looks like something was sprayed on it, but the pictures of the rear sight look very rusty.

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    LeagleEagle's Avatar
    Join Date
    May 2009
    Last On
    08-03-2017 @ 08:04 PM
    Location
    Texas
    Posts
    411
    Local Date
    06-06-2024
    Local Time
    11:59 PM
    Thread Starter
    The rust color is the from the photo and flash, reflecting off some oil I think. Doesn't look that way in person

  5. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Johnny Peppers's Avatar
    Join Date
    Mar 2009
    Last On
    05-01-2015 @ 11:25 PM
    Posts
    1,810
    Local Date
    06-06-2024
    Local Time
    11:59 PM
    Try making some pictures without the flash, and how about a close-up of the back sight.

  6. #5
    Legacy Member Neal Myers's Avatar
    Join Date
    Mar 2009
    Last On
    06-07-2023 @ 08:25 PM
    Posts
    474
    Local Date
    06-07-2024
    Local Time
    12:59 AM
    If it isn't rust, & it isn't dried oil, it might be some kind of lacquer. I'd try acetone & a nylon brush on it.

  7. #6
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:46 AM
    Location
    Victoria BC
    Posts
    30,050
    Real Name
    Jim
    Local Date
    06-06-2024
    Local Time
    09:59 PM
    In the past, some people have used motor oil on their rifles. It was whatever came to hand. Oil is oil right? It will dry and give you exactly the result you have there. If that's it, no harm done just do like Neal says and all will be well too.
    Regards, Jim

  8. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    RBruce's Avatar
    Join Date
    Mar 2009
    Last On
    10-13-2019 @ 08:28 AM
    Location
    Raleigh, NC
    Age
    80
    Posts
    661
    Local Date
    06-07-2024
    Local Time
    12:59 AM
    Sunburn?

  9. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    mack's Avatar
    Join Date
    Mar 2009
    Last On
    06-26-2018 @ 02:54 PM
    Posts
    159
    Local Date
    06-07-2024
    Local Time
    12:59 AM
    I would submit that the metal finish has been treated with some type of varnish or wood finish. It is entirely conceivable that, over time, the rifle was wiped down with an oily material like linseed oilicon or a light varnish like furniture polish. Some polishing oil has a distinct reddish color but repeatedly applying linseed oilicon could also produce such as result.

    If I might inquire, what was the stock like that you removed? Heavily coated with finish and smooth?

  10. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    LeagleEagle's Avatar
    Join Date
    May 2009
    Last On
    08-03-2017 @ 08:04 PM
    Location
    Texas
    Posts
    411
    Local Date
    06-06-2024
    Local Time
    11:59 PM
    Thread Starter
    The original stock was a beat up scant stock if I recall. I replaced it with a new one from Dupage a few years ago and linseed oiled it like crazy. There is no reddish tint in person, just when photographed.

  11. #10
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    74
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    06-06-2024
    Local Time
    09:59 PM
    Try taking the rifle outside on a "high cloudy" day or in some light shade and taking some more pictures. DON'T use a flash. Pictures taken inside and with flash often distort the color and/or finish of the rifle.
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

+ Reply to Thread

Similar Threads

  1. Early 1911 Finish question
    By imarangemaster in forum 1911/1911A1 Service Pistol
    Replies: 8
    Last Post: 04-22-2010, 03:29 PM
  2. Another stock finish question
    By Steve H. in N.Y. in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 01-16-2010, 09:54 AM
  3. Receiver Finish Question
    By Jughead in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 09-01-2009, 09:40 PM
  4. Smith Corona finish question
    By SteveL in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 16
    Last Post: 08-11-2009, 10:55 PM
  5. A Greek Finish Question
    By littledog in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 03-16-2009, 11:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts