M2 without Date

[EddieM]

Hey gents

Last weekend I visit a friend who has an M2 Inland SN 7225XXX in pretty good shape, the barrel is marked with the P and as Inland MFG Div General Motors but without a date and the flaming bomb, why?

Btw would you share a link for a video, manual, or tutorial to fully disassemble the all trigger house, please?

Thank you in advance

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Bruce McAskill]

There were several times during Inlands production that barrels were not dated. If I remember right the last one was about August 1944. Your barrel could have been stuck in a bin for many months before being used. Do a search on M2 carbines on U tube. I think you will find what you need there.

[EddieM]

There were several times during Inlands production that barrels were not dated. If I remember right the last one was about August 1944. Your barrel could have been stuck in a bin for many months before being used. Do a search on M2 carbines on U tube. I think you will find what you need there.

Hey Bruce
Thank you for your reply.
Regards

---------- Post added at 08:52 PM ---------- Previous post was at 08:48 PM ----------

The search engine here is your friend, also have a look above the discussion thread at the area full of additional help. Here's a video posted by a past notorious member that many should remember... https://www.milsurps.com/showthread.php?t=33212

Hey Jim,
As always thank you for your support, What I really need is an M2 full trigger (Kit) disassemble tutorial or manual.
Regards

[browningautorifle]

What I really need is an M2 full trigger (Kit) disassemble tutorial or manual

I used the FM I already had on hand, here's the one others use. https://www.amazon.ca/Carbine-M1A1-A.../dp/0949749508

It'll all be there.

[EddieM]

I used the FM I already had on hand, here's the one others use. https://www.amazon.ca/Carbine-M1A1-A.../dp/0949749508

It'll all be there.

Thank you very much Jim.
Cheers

---------- Post added at 10:04 AM ---------- Previous post was at 10:03 AM ----------

http://www.90thidpg.us/Reference/Man...-1276_1947.pdf

https://www.youtube.com/results?sear...it+disassemble

Thank you very much compadre

[browningautorifle]

Btw would you share a link for a video, manual, or tutorial to fully disassemble the all trigger house, please?

The search engine here is your friend, also have a look above the discussion thread at the area full of additional help. Here's a video posted by a past notorious member that many should remember... https://www.milsurps.com/showthread.php?t=33212

[painter777]

http://www.90thidpg.us/Reference/Man...-1276_1947.pdf

https://www.youtube.com/results?sear...it+disassemble