type 3 barrel band id

[cowboyminer]

new to collecting I bought a type 3 barrel band on ebay it has a circle with an A inside the circle. I was told it is an Inland barrel band. Can any one help me with the ID of all Inland ID letters.
thanks cowboy

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[lbelflowers]

Atlas Machine and Tool(1968-1969 contact).

[Bruce McAskill]

There were thousands of companies making parts for carbine production. Not all have yet been identified but as a rule of thumb if a part has the letter I on it with another letter it most often was made for Inland. An example would be a type 3 barrel band. If made for Inland it would be marked AI,KI or SI. hth

[Bill Ricca]

Atlas was a mistake I made about 10 years ago. I mixed it up with another contractor. The mistake was printed in the Carbine Club News Letter.

The actual contractor was Apex Metal Stampings, of Brooklyn, NY.

I am to blame for the misinformation. I appologize for the mistake.

[lbelflowers]

Thanks Bill! I have updated my master list.

Loren