Got this barreled action the other day..






Here's what I think I know so far...The Pics show what I think is a Blued Inland Type II 556xxx range carbine with the flip sight marked w/small s on its left side, Type II B barrel marked, INLAND MFG DIV/GERNERAL MOTORS/ 7-43 short skirt barrel, blued and BI marked = (Brown-Lipe-Chapin) Note the "V" on the front lug of the Receiver. P proof 6&7/8 inches behind the muzzle w/Type IA band marked UI.
Op Slide:Type IV Park’d, marked faint U on bottom, Well defined PI on the inside.
The Trigger Housing Lugs tell the story, also the Inland logo measures .160”= early. Now the hammer with the additional cuts on the rear portion of the hammer is not shown in the Riesch’s book. But in profile it ID’s as Dogleg Type II. But with the additional cuts what is this one called?.. It must be rare if it is not shown in the book.. Right?
Hammer spring 26.5 coils Type II, Hammer spring plunger, blued. The other parts in the T.G. Ive ID’d as: Type II Trigger Spring, Type I Trigger blued (measures the .541inch) marked RI, Sear:Blued Type I ground unmarked, Sear spring Type II ,in the white, Safety Type II unmarked, Plunger Assembly, Magazine Catch/Safety: Blued Type I, Magazine Catch Type IA marked WI
How rare are the blued ones? Given the pitting which includes some in the barrel should I part it out? Make a shooter out of it using the badly faked stock that's in my other thread..Value of it as a barreled action? The flip sight spring is weak and the L doesn't stay locked all the way down.. Thanks guys..
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.