No.4 Barrel Pre-Orders Available

[CriterionBarrels]

Good afternoon,

Now that our final design changes have been made and the first batch of blanks has been sent out to the production floor, a number of our dealers are now accepting pre-orders for the Criterion No.4 Lee Enfield replacement barrels.

We are planning on making the public announcement on June 1st, but we would like to give milsurps.com members the chance to place an order for the first limited production batch.

We plan on fulfilling pre-orders in the order they are received, and have multiple batches of blanks in process to accommodate orders received beyond the initial limited production batch.

Thank you for sharing your knowledge and providing support during the product development process (especially Brian Dick, Peter Laidler, and Nailcreek). We couldn't have done it without you!

More information can be found here: Lee Enfield No.4 Barrel

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[bigduke6]

Will you be exporting ? and if so would it be direct from yourselves ?

[CriterionBarrels]

We are currently in the process of sending sample barrels to a few interested distributors in the UK. Dealers are currently in place in Canada, New Zealand, and Australia. Barrels can also be shipped factory direct through a US-based exporter of your choice.

[Thunderbox]

I'd be interested in joining a consortium of UK RFDs for a combined order, if that would make a simpler and more cost-effective deal.

Are there any indicative prices that could be PM'd? There are quite a few UK RFDs not on this forum who might be interested.

[Roger Payne]

& some who are on the forum too!

ATB

[bigduke6]

& some with an open import licence.

[ssj]

Are you also making SMLE barrels? oh wait not yet? this year or net for SMLE?

---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------

[/COLOR]

We are currently in the process of sending sample barrels to a few interested distributors in the UK. Dealers are currently in place in Canada, New Zealand, and Australia. Barrels can also be shipped factory direct through a US-based exporter of your choice.

Except as its a barrel there is a $250USD state department fee to pay to export it.

[CriterionBarrels]

I'd be interested in joining a consortium of UK RFDs for a combined order, if that would make a simpler and more cost-effective deal.

Are there any indicative prices that could be PM'd? There are quite a few UK RFDs not on this forum who might be interested.

Feel free to send me an email at contact@criterionbarrels.com for larger volume pricing information. I would be more than happy to provide a quote based on your level of demand.

-Josh

---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------

Are you also making SMLE barrels? oh wait not yet? this year or net for SMLE?

---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------

[/COLOR]

SMLE barrel models are also in the works. I don't have an ETA as of yet (it depends on how many dimensional changes are required on the breech end), but they should be following shortly behind the No.4 barrels in the production schedule.

[Simon P]

I'd be interested in joining a consortium of UK RFDs for a combined order, if that would make a simpler and more cost-effective deal.

Are there any indicative prices that could be PM'd? There are quite a few UK RFDs not on this forum who might be interested.

I'm an RFD too and would take some as well to make the most of volume purchasing.