And please if your going to strip it first and always first remove the fore woods first upper and lower then the butt always tap the top (Alternate sides) rear of the bottom forewood down as well to remove it from the draws on the bottom of the receiver if you pull it down from the muzzle end first to remove it you'll do damage to the draws area. Read up on the articles on removing the furniture.
Also with the mag make sure its for a No.4 as the MKIII mag will not fit the rifle you have as the rib on the back of the No.4 mag does not go full length have a look at pics of them both so you know which one to get all the other stuff is easy all the screws go in from the left-rightInformation
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.