+ Reply to Thread
Results 1 to 6 of 6

Thread: '03 Sporter Questions

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member keno's Avatar
    Join Date
    Dec 2020
    Last On
    12-12-2020 @ 07:59 PM
    Location
    Madison, MS
    Posts
    2
    Local Date
    10-31-2024
    Local Time
    07:02 PM

    '03 Sporter Questions

    A friend brought me a 1903 Springfield Sporter to evaluate. He thought he had found a Sporterized sniper rifle...groan...groan. I will post some photos later; however; I thought I would begin with my observations. First the serial number is 1235002. Receiver has a Lyman 48 peep sight and a G&H type scope base. Safety marked READY. Barrel marked SA (flaming bomb) 8- 21, star at 12 0'clock and has Marble front sight. Barrel and receiver line up marks are off...barrel mark is even with serial number...so this barrel did not start out on this receiver. Stock is quality nicely figured walnut, finely checkered and has a Schnabel fore end....unfortunately has a red Palace Cafe recoil pad. Grip cap looks like horn,,,but could be plastic. This rifle has been in someone's closet for a long time and my friend did not pay enough for it to warrant any intentional fakery. Anyhow...this rifle is much better than your average assembled from scrounged parts sporter. Again...I will get some photos posted later today. I would appreciate thoughts !?!?!?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member rcathey's Avatar
    Join Date
    Dec 2012
    Last On
    09-02-2024 @ 08:28 PM
    Location
    St. Louis, MO Area
    Posts
    1,645
    Local Date
    10-31-2024
    Local Time
    08:02 PM
    Looking forward to the pictures. This sounds right up my alley.

    Initial thoughts: that serial number is too early to be an actual Springfield Armory Sporter so that lines up with your observations about the barrel being swapped.
    Sporter parts were available though and it sounds like someone put one together.
    I agree with you that this wouldn't be a "scrounged parts sporter," though. A nice stock, a sporter barrel, a Lyman 48, and a G&H scope mount...someone put a fair amount of cash into this project!
    -Ryan

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member champ0608's Avatar
    Join Date
    May 2010
    Last On
    07-06-2024 @ 12:10 AM
    Location
    Arizona
    Age
    37
    Posts
    101
    Real Name
    Jamie
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    I'd love to see pictures. In my observation, the 1.23 serial range was the first to have barrels with star marks on the muzzle, and those barrels tended to be 8-21 and 11-21 (based on a handful I've seen and kept notes on.) If the barrel isn't original to the receiver, it would be a heck of a coincidence or required A LOT of searching to find the exact right barrel.

  6. #4
    Contributing Member Herschel's Avatar
    Join Date
    Mar 2009
    Last On
    10-22-2024 @ 01:56 AM
    Location
    Arkansas
    Posts
    254
    Local Date
    10-31-2024
    Local Time
    08:02 PM
    That is a very interesting rifle. There were many good gunsmiths back in the 1920's and 1930's that assembled 1903 actions into rifles that were sometimes near works of art.
    The rifle is not a candidate for restoring to issue 1903 configuration due to the holes drilled into the receiver to mount the scope mount base and Lyman 48 sight. What you are referring to as the index mark may be the slot machined into the barrel to stabilize the original military rear sight. I say the barrel is the original on the rifle. There is too much coincidence in
    the barrel date and receiver date being from the approximate time frame. The star guage mark on the barrel is a strong suggestion that the rifle started out life as a
    National Match 1903. My estimate of the rifles history is that someone who wanted a fine sporting rifle bought a NM 1903, had a fine gunsmith convert it into a fine sporting rifle.
    The gunsmiths name may be in the barrel channel. I would say let Bubba look at it but don't let him approach it with tools. When you post pictures some of us with Petrov's books
    on custom sporting rifles may be able to compare the rifle with pictures in the books and get a pretty good idea of the gunsmith who made it. I agree with rcathey that someone
    put a fair amount of money into the creation of this truly custom sporter.
    Last edited by Herschel; 12-12-2020 at 08:50 AM.

  7. #5
    Legacy Member Sunray's Avatar
    Join Date
    Mar 2009
    Last On
    03-29-2021 @ 03:01 PM
    Location
    London, Ontario
    Posts
    1,053
    Local Date
    10-31-2024
    Local Time
    09:02 PM
    "...gunsmiths back in the 1920's and 1930's..." And long after W.W. II.
    S/N says 1921. There's a list here.
    US Model 1903 Springfield Rifle Serial Number Ranges - Muzzle First
    According to these guys, the last serial number for an NRA Sporter was “1408446”. Doesn't mean somebody didn't make a copy. Doesn't mean it's a "fake" either.
    *RARE SPRINGFIELD ARMORY MODEL 1903 SPORTER.
    Some guys here discussed 'em back in '09.
    https://www.milsurps.com/showthread.php?t=6114
    Spelling and Grammar count!

  8. #6
    Contributing Member Herschel's Avatar
    Join Date
    Mar 2009
    Last On
    10-22-2024 @ 01:56 AM
    Location
    Arkansas
    Posts
    254
    Local Date
    10-31-2024
    Local Time
    08:02 PM
    There are sporterized 1903 Springfields, many of which were made up by a owners or gunsmiths by simply replacing the wood with a Bishop or Fajen stock. There were others made by master gunsmiths, which I think is the rifle the OP started this thread about.

    Then there are the 1903 NRA Sporters that came as new items from Springfield Armory with the 1922 stock (sometimes called the NRA stock) , a Lyman 48S rear sight, a slightly heavier barrel than the issue 1903 barrel and a beautiful rust blue finish. These were made from 1923 into the middle 1930's.

    In my collection there is a custom 1903 Springfield made by Bruce Dawson of West Plains, MO. He used an original 1903 barrel which he slimmed down. In the rear end of the barrel there is the remnant of the slight groove that I mentioned in my previous post. The groove lines up with serial number on the receiver. The only thing that gives me pause in my speculation of the history of #1235002 is the star guage mark at 12 o'clock on the muzzle. All I have seen or read of were at the 6 o'clock position. FWIW

    Additional comment
    Thanks to Sunray for posting the link to the thread from 2009. I was surprised to see that I also participated in that thread as I didn't remember it. I am happy to see that what I said back then agrees with I said today.
    Last edited by Herschel; 12-12-2020 at 03:18 PM.

+ Reply to Thread

Similar Threads

  1. Questions About My Newly Acquired 1922 Sporter
    By InTheWoods in forum .22 Smallbore
    Replies: 4
    Last Post: 08-12-2013, 07:52 PM
  2. 1941 Fazakerley No.4 Mk.1 missing pieces - questions, questions, questions....
    By spinecracker in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 24
    Last Post: 11-05-2011, 05:31 PM
  3. 1903A3 Sporter Questions
    By mjwaterma in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 25
    Last Post: 05-23-2011, 10:36 PM
  4. 1938 Model Turkish Mauser - questions, questions...
    By spinecracker in forum Mauser Rifles
    Replies: 1
    Last Post: 08-28-2010, 10:46 PM
  5. Inherited a Springfield sporter .. questions?
    By Mark M in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 13
    Last Post: 05-07-2010, 09:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts