+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: In the mean time ... RIC

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM

    In the mean time ... RIC

    Since i was about to do the final finish on my P13 i figured i might as well finish the wood on one of my other project. A RIC that's been on the bench for almost as long.

    I had purchased this from someone that had started to finish it as a regular Carbine but never finished it.
    After talking with a few people, the consensus was that this carbine had indeed been turned into a RIC at some point in time.
    So that was the direction i was going to take.

    I already had a few parts and a modified SMLE stock from a previous project that never materialized.
    Only the barrel busing was really missing so i had that fabricated.

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by tatou; 05-21-2022 at 10:13 PM.

  2. The Following 2 Members Say Thank You to tatou For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    Like i mentioned the SMLE stock was modified years ago (when they were easy to find and dirt cheap) and was going to restore a chopped up MLE. Turning it into a carbine clone.
    Now the stock ended up a bit too short but since real RIC carbines have the nose cap section spliced on, i just cut the tip and made a new splice.
    All the pictures i saw showed that this splice was not matching so i made sure to do it like that, to had realism.

    Last edited by tatou; 05-21-2022 at 09:57 PM.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    The butt stock i had was a heavily sanded MLE with the cut out for the butt plate tang.
    I filled that in, simulating a repair we often see on Lee Enfields butt stocks.


  7. #4
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    Fast forward to the recent days i needed to take care of a few small details and some mishaps that happened over the years this stock was moved around.
    Filled in a small chip that i made (and lost) on the butt stock.


  8. #5
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    I glued some veneer to the butt socket section to make it nice and tight.


  9. #6
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    I riveted spring clips to the handguard.
    And i just noticed as i was posting these pics a cracks appears on the inside so i guest that will need a bit of glue....


  10. #7
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    Since this was initially a SMLE fore end, it was missing the two Brass washers surounding the retaining pin.
    I made the washers, made a small punch out tool and slowly carved out the wood around the pins and filed them flush.
    The washers are quite snug and glued... they dont look like they are coming out.


  11. #8
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    10-31-2024
    Local Time
    06:02 PM
    Thread Starter
    A few small repairs here and there, around the trigger guard and nose cap and the wood is done.
    One last wash and it's ready for finishing.

  12. The Following 3 Members Say Thank You to tatou For This Useful Post:


  13. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 06:59 PM
    Location
    Victoria BC
    Posts
    30,402
    Real Name
    Jim
    Local Date
    10-31-2024
    Local Time
    04:02 PM
    Once it's stained up, it'll be prefect...again.
    Regards, Jim

  14. Thank You to browningautorifle For This Useful Post:


  15. #10
    Contributing Member smle addict's Avatar
    Join Date
    Dec 2011
    Last On
    Today @ 04:17 PM
    Location
    CA, USA
    Posts
    490
    Real Name
    A. G.
    Local Date
    10-31-2024
    Local Time
    04:02 PM
    Beautiful work!

  16. Thank You to smle addict For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. THAT Time again!
    By tankhunter in forum The Bren LMG (Light Machine Gun)
    Replies: 6
    Last Post: 12-25-2014, 12:43 PM
  2. It's about time!
    By Bill Hollinger in forum The Watering Hole OT (Off Topic) Forum
    Replies: 6
    Last Post: 06-25-2011, 06:22 PM
  3. Thank you for your time and help.
    By Jinx in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 1
    Last Post: 04-08-2011, 04:18 PM
  4. Time for this...again.
    By Nate in forum Other U.S. Service Rifles
    Replies: 4
    Last Post: 05-09-2009, 02:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts