+ Reply to Thread
Results 1 to 10 of 10

Thread: It keeps me out of mischief..........

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    10-23-2024 @ 04:26 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,506
    Real Name
    Roger Payne
    Local Date
    10-31-2024
    Local Time
    11:53 PM

    It keeps me out of mischief..........

    Among the ex-Indian No32 wrecks that I bought there were a few Mk3 scopes that I jealously guarded. Well, it's now getting to the time to rebuild & do something with these. Except I noticed that I was almost out of the late type segment covers that one sees on most Mk3 scopes. I'd got plenty of the 'common' four screw type, just not the ones that I was going to need. In the end I bought a piece of brass sheet & thought 'you might just as well have a go yourself'. I have made three or four now by cutting & filing, & they seem pretty satisfactory. I suppose I ought to give the centres a little tap with a blunt punch, but even so they seem ok. They still need the edges dressed a fraction & the minor bruises courtesy of yours truly tickled out, but, I think they'll do in the absence of a box of originals.....!

    Anyone else been creative lately?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Attached Thumbnails Click image for larger version

Name:	IMG_4572.JPG‎
Views:	271
Size:	584.1 KB
ID:	131207   Click image for larger version

Name:	IMG_4702.JPG‎
Views:	245
Size:	994.0 KB
ID:	131208   Click image for larger version

Name:	IMG_4704.PNG‎
Views:	242
Size:	1.12 MB
ID:	131209  

  2. The Following 15 Members Say Thank You to Roger Payne For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Contributing Member waco16's Avatar
    Join Date
    Oct 2011
    Last On
    Today @ 04:57 PM
    Location
    South West, UK
    Posts
    342
    Real Name
    Neil Pearce
    Local Date
    10-31-2024
    Local Time
    10:53 PM
    Nice job, Roger!

  5. Thank You to waco16 For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Contributing Member Brian B's Avatar
    Join Date
    Oct 2007
    Last On
    Today @ 01:35 PM
    Location
    ALTADENA, CA
    Posts
    364
    Real Name
    Brian Brown
    Local Date
    10-31-2024
    Local Time
    03:53 PM
    Nicely done Roger!!

  8. Thank You to Brian B For This Useful Post:


  9. #4
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,846
    Local Date
    10-31-2024
    Local Time
    03:53 PM
    So often true isn't it that if we get stuck in with even simple tools we often get things done much more easily than we first expect? Have such a project in front of me at the moment.

    You might see if a jeweller could run the brass between his rolls to put the curve on without hammering.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  10. Thank You to Surpmil For This Useful Post:


  11. #5
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    10-23-2024 @ 04:26 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,506
    Real Name
    Roger Payne
    Local Date
    10-31-2024
    Local Time
    11:53 PM
    Thread Starter
    Good idea. For the moment I've just used a simple mandrel that I turned to the right diameter out of a length of mild steel rod, heating & quenching the brass first to soften it.

    Of course, my way is a long-winded labour intensive way of doing it. I've no doubt a professional outfit could bang them out perfectly by the hundred. The problem is I'd have to order them by the hundred & I only need half a dozen, so this will have to do!

    By the way, the Kelly Hoppen interior design books are buXXer all to do with me.......no doubt you can guess to whom they belong......
    Last edited by Roger Payne; 05-26-2023 at 05:47 AM.

  12. #6
    Legacy Member scharfschutzen63's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 08:19 PM
    Location
    USA
    Posts
    106
    Local Date
    10-31-2024
    Local Time
    05:53 PM
    Does an original have teeth on the underside to lock in the adjustment?

  13. Thank You to scharfschutzen63 For This Useful Post:


  14. #7
    Advisory Panel Brian Dick's Avatar
    Join Date
    Apr 2008
    Last On
    09-25-2024 @ 03:05 PM
    Location
    Edgefield, SC USA
    Posts
    4,090
    Local Date
    10-31-2024
    Local Time
    06:53 PM
    The "teeth" are on the little erector segment and not on the plate. The plate holds the segment to lock the erector in place.

  15. The Following 3 Members Say Thank You to Brian Dick For This Useful Post:


  16. #8
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    10-23-2024 @ 04:26 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,506
    Real Name
    Roger Payne
    Local Date
    10-31-2024
    Local Time
    11:53 PM
    Thread Starter
    As Brian says. Here's a segment shown, & how it fits against the radial grooves on the erector cell. The downward pressure exerted by the brass segment cover stops the segment from moving & so in turn stops the erector cell from moving within the scope tube.
    Attached Thumbnails Click image for larger version

Name:	IMG_4706.JPG‎
Views:	184
Size:	961.8 KB
ID:	131212   Click image for larger version

Name:	IMG_4707.JPG‎
Views:	175
Size:	926.2 KB
ID:	131213  

  17. The Following 2 Members Say Thank You to Roger Payne For This Useful Post:


  18. #9
    Advisory Panel
    Warren's Avatar
    Join Date
    Dec 2006
    Last On
    10-27-2024 @ 01:47 PM
    Posts
    1,201
    Local Date
    10-31-2024
    Local Time
    06:53 PM
    Some erector plate covers do have teeth or checkering on the inside of them.
    I have only run into two or three in the several hundred scopes I have worked on but they do exist.
    I think I might have kept photo of one.
    One thing you learn real fast on the No.32 scope.....any Mk., is the only thing that is consistent is inconsistency.
    cheers,
    Warren

    If you do get an erector cell that does move on you, you can make a short BA 8 grub screw and put it under the screw holding the erector plate to the tube.
    It is something I have had to do with a number of the repro scopes as the early ones, the erector cell was just glued in with RTV.
    Last edited by Warren; 05-31-2023 at 11:46 AM.

  19. Thank You to Warren For This Useful Post:


  20. #10
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    10-23-2024 @ 04:26 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,506
    Real Name
    Roger Payne
    Local Date
    10-31-2024
    Local Time
    11:53 PM
    Thread Starter
    I didn't know that Warren - about the grooved segment covers, I mean. Never ever seen one like that. If you can find the photo I'd love to see it. Presumably the segments in these scopes are also ridged to mate up with the ridges on the covers??

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts