-
FREE MEMBER
NO Posting or PM's Allowed
P38 Questions
I own a gunshop and had a customer bring me a P38 and I am having a hard time finding info on the gun. Here are the markings I can see.
Slide:
P. 38
cvq
SN: 2596
s (in front of safety)
looks like eagle over 88
eagle over swastika
Barrel:
under bbl sn matches slide
top stamp looks like lion on hind feet
Frame:
SN: 2596 with what looks like an e after
eagle over 135 above trigger
trigger has eagle over 359
Grips look like wood shavings mixed with brown/red plastic
Magazine base plate sn matches
Barrel looks great, gun shows some wear and lots of machining marks but the black finnish looks great.
Any help would be great, I have another customer that wants it bad, but I might need to keep this one for myself.
Thanks
Jeff
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
03-15-2009 08:06 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Pictures sure would help. Sounds like maybe a force matched pistol. The cvq/cyq was code for the manufacturer Spreewerke, as well as the eagle/88 acceptance stamp.
The eagle/135 is the acceptance stamp for Mauser, and the eagle/359 is the acceptance stamp for Walther.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Jeff,
Johnny is spot on. Here are some old photos I have of my Spreewerke P-38 that references what Johnny is describing. Not the best photos, but you can see where they are all eagles over 88. Another obvious thing to look at is that the serial number on the frame should match the receiver.
Regards,
Pat
-
Legacy Member
Spreewerke guns always show lots of machine marks; they are the poorest finished of all wartime manufacturers. So, they have the lowest value of the P38s for that reason.
When describing wear, it's best to give a percentage. But, cyq's in 99% or better condition are not that scarce, so one with considerable wear will be hard to sell.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Cz46
Your P38 sounds like what we call a CZ46. They were made in Czechoslovakia in 1946 and usually have an E and Lion on the left trigger guard..and, a '46' on the right trigger guard.
3000 were made up from parts at that time. Later, many ended up in the DDR for some reason?
The rampant lion on the top of the chamber is another indication. Often, the slide will have an 'S' stamped somewhere near the safety.
The SN on the slide is usually under the 'P.38' stamp.
Orv