I recently acquired a July ‘42 Springfield with many correct parts, but the thing I was most curious about are the rear sights. I don’t know much about Type 1 Lockbars other than when they were produced and that they’re incredibly rare.
The rifle I purchased supposedly has them, but I don’t know how to tell if they’re fake or not. I don’t know the history of their reproduction as well so I truly am in the dark. I wasn’t able to find any photographs of fake ones online.
Photos are attached here: https://imgur.com/a/NBpcTp9
Rest of the rifle here: https://imgur.com/a/DiLF7zj
The lockbar was on pretty snug, and so I used my shirt to twist it. With the extra force I was able to twist the lockbars twice before it fell off and I panicked.
Any information I would sincerely appreciate! Thank you!
Respectfully,
- Michael
Information
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.
Last edited by Mark in Rochester; 08-03-2022 at 11:25 PM.
He is no fool who gives what he cannot keep to gain that which he cannot lose
There are no great men, only great challenges that ordinary men are forced by circumstances to meet.
These have been faked for years due to their value, as a complete rear sight assembly with original short pinion and Type 1 lock bar will cost around $600 plus. As you stated on another forum, you paid $1600 for the complete 1942 rifle which would indicate you bought this rifle from someone without any knowledge of early parts - or the Type 1 lock bar is a cheap reproduction. Your Type 1 lock bar is lacking any machining marks and you should always post a photo of the short pinion that came with the lock bar. These are also faked from the later long pinions by reducing the length and re-threading.
Photos show original Type 1 lock bars on a June 1942 rifle and a 38K early rebuild
These have been faked for years due to their value, as a complete rear sight assembly with original short pinion and Type 1 lock bar will cost around $600 plus. As you stated on another forum, you paid $1600 for the complete 1942 rifle which would indicate you bought this rifle from someone without any knowledge of early parts - or the Type 1 lock bar is a cheap reproduction. Your Type 1 lock bar is lacking any machining marks and you should always post a photo of the short pinion that came with the lock bar. These are also faked from the later long pinions by reducing the length and re-threading.Attachment 127723Attachment 127724Attachment 127725Attachment 127726Attachment 127727
Photos show original Type 1 lock bars on a June 1942 rifle and a 38K early rebuild
Actually, yes the author made no mention of early parts in the advertisement. They simply listed the rifle as a “July 1942 Six-Digit M1 Garand with no other identifiable features. No specific mention to early parts like the lockbar. That’s essentially why I bought the rifle, as they may not have realized what they had and so I purchased it on the chance they were legitimate and it wouldn’t be a loss if they were fake.
I have attached additional photographs of the disassembled rear sight for further discussion. If there’s anything you see or anything you don’t see please let me know!
You have a nice example of a mid 1942 rifle to work with. But I think that the Type 1 lock bar is a repro and that the short pinion has been re-threaded.
Just my opinion as others may feel that your parts are original.
You have a nice example of a mid 1942 rifle to work with. But I think that the Type 1 lock bar is a repro and that the short pinion has been re-threaded.
Just my opinion as others may feel that your parts are original.
Admittedly, I am unable to tell a difference between the pictures you offered and my own, I just honestly don't think I have the eyes/expertise for that.
Are there any examples of re-threaded pinions or fake Type 1 Lockbars I could use for reference that you may be aware of? I wasn't able to find any on my own, unfortunately.