6.5 snap caps

[stjohns]

Does anyone sell japanese 6.5 snap caps? Would 6.5x52 carcano work?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Patrick Chadwick]

Would 6.5x52 carcano work?

I doubt it, and here's why:
----------------------------------Carcano --Arisaka
Rim diameter ------------------ 11.41 ----- 12.08
P1 powder chamber diameter 11.41 --- 11.45
(not much chance of the Arisaka extractor holding the Carcano case)
L1 (length to shoulder -------- 41.20 ---- 38.92
L2 (length to start of neck) -- 44.96 ---- 43.40
L3 (case length) --------------- 52.50 ---- 51.00

Arisaka chambers may be loose, but not that loose!
Basically, the Arisaka cartridge is shorter and fatter than the Carcano.


Patrick

[jonnyc]

There are some pretty expensive Japanese examples ($15++), but you'd be better off making some of your own.

[Johnny Peppers]

If you plan to do a lot of dry firing with your rifle, go ahead an get a proper snap cap for it. A fired case or pencil eraser simply doesn't make an adequate snap cap for a rifle.