Bren tripod t&e adjustment

[WallyG.]

You might also want to look into finding a replacement front attachment pivot... from the picture above it looks like a bar has been welded to a flat spot ground on the top of the attachment point for the bren... such a piece of steel would mimic the attachment point for an MG-3/Mg-42. With that piece of metal on there you will not be able to mount a Bren.

Check BRP Guns inventory of parts.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

a bar has been welded to a flat spot ground on the top of the attachment point for the bren

So it is. I'd just make that all gone myself...carefully. There were lots of these altered for other things.