Printable View
im helping a barrel maker with a reprodution P14 barrel, they need the last 5 inches of the barrel with a front sight, so that they can copy the dems.
a DP barrel would be great, just cut the end off and send it to me....
this will speed up the production...thanks...
I have a take off barrel and the dimensions seem like they are the same as those on a 1917 barrel when held side by side. My cheap calipers took a dump while i was starting to measure.
john
the diameter is different at the front sight..i belive the 14 is smaller.
Can give you the dimensions Chuck if its anygood, only scrap barrel i have is getting relined to .22LR
Here is a quick comparrison of a p-14 barrel to a 10-17 eddy, HS and JA barrels that I have.
p-14 eddy HS JA
at muzzle .595 .600 .596 .601
at front of slot .599 .601 .600 .603
at rear of slot .608 .612 .610 .613
at 4" .636 .644 .651 .648
I have a p-14 bayonet that fits the five '17s in my group just fine.If it would help I could send you the barrel.
john
for some reason everything in my table shifted to the left.
john
try this....try and install a P14 front sight onto a 1917 barrel...and then try a 1917 onto a P14....see what you get....for some reason they wont swap one way..cant remember what off the top of my head,,,and like a bone head, i used that last scrap 14 barrel i had to make a shifter for my pickup....looks cool, but ruined the OD..for a shift knob.