Search:

Type: Posts; User: bob q; Excluded Forums: Milsurp Knowledge Libraries (READ ONLY)

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    12
    Views
    325

    To head space a rifle is to set up the head space...

    To head space a rifle is to set up the head space clearance , not to check it . Go and no go gauges are meant to be used to set up the head space . How many barrels have you shanked , cut threads and...
  2. Replies
    12
    Views
    325

    I asked how you headspace the bolt AFTER the...

    I asked how you headspace the bolt AFTER the barrel is installed , like you said .
  3. Replies
    12
    Views
    325

    With about 80 years of stock shrinkage the old...

    With about 80 years of stock shrinkage the old marks will not matter any more . If you do not get them tight you can crack a stock with recoil . Just look at all the tang cracked Mausers out there...
  4. Replies
    12
    Views
    325

    As tight as you can get them with a good fitting...

    As tight as you can get them with a good fitting screw driver by hand . Get both screws in and just touching . bang the gun down on the buttplate muzzle up a few times . Tighten the forward screw...
  5. Replies
    11
    Views
    351

    The number 4 stamping . Radom used a footed 4 on...

    The number 4 stamping . Radom used a footed 4 on the date stamp , Steyr did not .
  6. Replies
    11
    Views
    351

    The best I can tell that rifle was finished at...

    The best I can tell that rifle was finished at Steyr .
  7. Replies
    11
    Views
    351

    I need to see the 4 in the 42 date stamp .

    I need to see the 4 in the 42 date stamp .
  8. Replies
    11
    Views
    351

    Is your rifle a Steyr or Radom made rifle ?

    Is your rifle a Steyr or Radom made rifle ?
  9. Thread: Hey Ovidio

    by bob q
    Replies
    12
    Views
    429

    I do not shoot bobcats or anything else that...

    I do not shoot bobcats or anything else that lives out there . There is no reason to . The chair welded on top truck is a little more than that . But in some of our rough off road chases the guys on...
  10. Thread: Hey Ovidio

    by bob q
    Replies
    12
    Views
    429

    The thermal hunts were all stalk and shoot . A...

    The thermal hunts were all stalk and shoot . A chair welded to the top sounds dangerous . On the big ranch we do use a jeep with a hole in the roof so the back seat guy can stand up an shoot with...
  11. Thread: Hey Ovidio

    by bob q
    Replies
    12
    Views
    429

    The last one on the 3000 place was a shoot fest ....

    The last one on the 3000 place was a shoot fest . It is a 4 day event with about 25 guys coming in from all over Texas . There is a range in one of the canyons with about 50 steel targets out to a...
  12. Thread: Hey Ovidio

    by bob q
    Replies
    12
    Views
    429

    My other friend's place is 186,000 acres . You...

    My other friend's place is 186,000 acres . You can spend 2 days driving around hunting and only cover a part of it . I will hunt at friend's for a change from mine now and then . In Texas there are a...
  13. Thread: Hey Ovidio

    by bob q
    Replies
    12
    Views
    429

    Hey Ovidio

    Pig hunt stories for you . I went to a friend's 3000 acre ranch that is on the edge of some canyons . I got 5 wild boars for a total of about 1000 lbs . 170 to 250 . I used a thermal scope and a 30...
  14. Replies
    6
    Views
    355

    You may want to get someone who speaks , and can...

    You may want to get someone who speaks , and can write in English to help you with the post as it does not make much sense .
  15. Thread: GEW bolt heads

    by bob q
    Replies
    6
    Views
    187

    The Gew98 is a one piece bolt , it does not have...

    The Gew98 is a one piece bolt , it does not have a bolt head . You would be better off just getting a complete rifle . The barrels just screw in , no sights to have to swap . Barrels are cheap , but...
  16. Replies
    8
    Views
    598

    You guys are getting hit pretty hard again ,...

    You guys are getting hit pretty hard again , correct ? Luckily in my part of Tx it has never really affected me much at all .
  17. Replies
    8
    Views
    350

    On the box it is in with the reload data label .

    On the box it is in with the reload data label .
  18. Replies
    33
    Views
    1,171

    There is no way a 7.35 will chamber in a 6.5...

    There is no way a 7.35 will chamber in a 6.5 rifle . I do not know how that myth got started , but a 30 cal bullet is nowhere close to a 26 cal bullet in dia .
  19. Replies
    3
    Views
    167

    The ff is part of the serial number . 1234ff

    The ff is part of the serial number . 1234ff
  20. Thread: Type 38 Story

    by bob q
    Replies
    2
    Views
    284

    How would the 7.7mm ammo chamber in the 6.5mm ? I...

    How would the 7.7mm ammo chamber in the 6.5mm ? I had an old gun shop owner / smith tell me the Japanese designed the T-99 to be able to fire " our " 30/06 ammo in battle and it would . Was he...
  21. The problem with the Enfields is the bolt locking...

    The problem with the Enfields is the bolt locking on one side in the middle , they are bridge lockers . Full power loads compress the bolt body about .0012 , then is springs back . That is what...
  22. Replies
    15
    Views
    798

    A good explanation of bullet flight and it...

    A good explanation of bullet flight and it applies to all bullets , they settle more as the range increases . That is why saying a gun shoots MOA at all distances wrong . A pointed bullet will enter...
  23. Replies
    15
    Views
    798

    While test firing over 2000 different types of...

    While test firing over 2000 different types of military rifles for accuracy I never needed a gauge to check anything to see if it would shoot . A good slug reading will get you the land and groove at...
  24. Replies
    15
    Views
    798

    Try the Hornady .312 174 rn bullet seated with...

    Try the Hornady .312 174 rn bullet seated with the whole crimp groove showing and about 19.8 grains of SR-4759 or 20.8 of XMR-5744 . Use a mag primer and measure the powder well as it does not meter...
  25. Thread: Type 38 info

    by bob q
    Replies
    12
    Views
    772

    All type-38's came with dust covers . There were...

    All type-38's came with dust covers . There were no parts being excluded from T-38 rifles during production . That only applies to Type-99 rifles .
Results 1 to 25 of 120
Page 1 of 5 1 2 3 4
Service Publications