-
Legacy Member
95 chilean Short rifle 7mm Mauser
Hey guys,
This rifle has a 1:8 twist and a assuming the 175 grain bullet would be best to load for the best accuracy? The groove measures .285
Any input would be appreciated.
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by milboltnut; 02-04-2017 at 10:25 PM.
-
-
02-04-2017 10:22 PM
# ADS
Friends and Sponsors
-
Legacy Member
Very long throat. Will need a heavy bullet and only moderate velocity.
-
-
-
Legacy Member
Yall think it's admired more so than most?
http://www.surplusrifleforum.com/dow...1643&mode=view
here's one fellers input....
I have two Spanish 1893's and found that the long 175 grn & 165 grn round nose bullets had to be seated
a little deeper than normal to feed in my guns, but that pointed spitzer types feed with no problems. Both
rifles are quite accurate with all weight bullets tried so far. :thumb: never checked the twist though.
and another's....
Try the S&B-176G-SPCE. Has large bearing surface and works well for me!
and how about his...
Try the S&B-176G-SPCE. Has large bearing surface and works well for me!
That ammo has shot tiny groups for me too. So has some old 173gr RN Lapua Softpoint.
doesn't sound seatin bullet close to the lands needs to be done.
Last edited by milboltnut; 02-05-2017 at 06:45 PM.
-