-
Advisory Panel
Monkey Business
Before:
Attachment 48658
Attachment 48659
After:
Attachment 48660
Attachment 48661
The complete rifle:
Attachment 48662
The toughest wood repair job I've done up to now. More some other day, when I've recovered!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 11 Members Say Thank You to Patrick Chadwick For This Useful Post:
CINDERS,
frankderrico,
gsimmons,
HOOKED ON HISTORY,
jmoore,
Midmichigun,
Ridolpho,
Roger Payne,
tbonesmith,
villiers,
Vincent
-
01-07-2014 03:07 PM
# ADS
Friends and Sponsors
-
Legacy Member
Nice Monkey Tail you have there Patrick. What caliber? Looks like the wood woims made lunch out of the stock but you did a fine job of repairing it, can hardly see it.
-
-
-
Legacy Member
Outstanding work, bravo!!!
-
-
FREE MEMBER
NO Posting or PM's Allowed
Very nice work, that looks great!
-
Legacy Member
What tipe of glue do you use? Did you dowel the repair? Lovely job!
-
-
Legacy Member
Well done Patrick!.....Frank
-
-
Contributing Member
Par excellence and great skill
-
-
Advisory Panel

Originally Posted by
HOOKED ON HISTORY
What tipe of glue do you use? Did you dowel the repair? Lovely job!
I use Ponal Express - a modern PVA glue from Henkel (makers of Pattex). I have looked at various resin-type glues, but they all harden far too quickly for mending breaks - you have no time to adjust the pieces after applying the glue. On the container it claims that significant strength is already obtained after 5 minutes. Not true with hardwoods, where the dense structure means that you MUST leave the joint clamped overnight, better 24 hrs.
And resins can be quite brittle when they harden. PVA remains slightly elastic, but is strong enough that if you glue two pieces of softwood together, and then deliberately break the joint (no hearsay - I tried it myself before starting on the Monkey Tail) the wood will fail rather than the glue.
The joint was not dowelled, but a 4mm stainless steel threaded rod was inserted to provide some continuous compression. Full explanation with pics will be provided in a later post.
-
The Following 5 Members Say Thank You to Patrick Chadwick For This Useful Post:
-
Advisory Panel
Monkey Tail caliber

Originally Posted by
vintage hunter
What caliber?
No doubt about that - it's marked on the receiver!
Bore diameter 450
Attachment 48674
Groove diameter
Attachment 48675
Slugging the bore confirmed these values.
-
-
Advisory Panel
Monkey markings

Originally Posted by
vintage hunter
Looks like the wood woims made lunch out of the stock
Yeah, them woody woims is a pest!
If there are any Monkey Tail or Portuguese rifle experts out there, perhaps someone could help me with the markings?
The two attached photos show a number above the trigger that may be a Portuguese rack number, with a small triangle to its left.
To the left of that, above the sling swivel, there appears to be stamped "FA" (maybe PA) over 1886??? Portuguese arsenal mark ???? The marking is so faint, but the integrating power of the eye in "joining the dots" is so strong, that you can make this out more or less if you move your head around while looking at the screen. Weird but true!
Any explanation for the markings would be most welcome.
Last edited by Patrick Chadwick; 01-08-2014 at 06:17 AM.
-
Thank You to Patrick Chadwick For This Useful Post: