FYI & Fwiw I've recently tried & had very good success with 30-06 reloads for the M1icon (&03A3) using IMR4166 powder. Looks like 47.0 gr with 155 Amax in HXP63 & 71 cases is a winner in both rifles. 5 round groups from the M1 off the bags at 100 yds are typically 1.3"" on SR1 target (5 rounds of 5 with best group at 1" and worst at 1.6"; no wind, no sun). Good performance on target and cleaning is super easy........minimal copper & fouling after 50 rounds. I was using Imr4895 & 4064 but I'm moving to 4166 for 150 & 155 gr loads. Have not tried 168gr Amax yet but will report when they get fired. As always with reloads work up, be careful, and of course YMMV
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.