Results 1 to 7 of 7

Thread: Barrel run in day

Click here to increase the font size Click here to reduce the font size

Threaded View

  1. #1
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    06-09-2025 @ 11:38 PM
    Location
    South West Western Australia
    Posts
    8,108
    Real Name
    CINDERS
    Local Date
    06-11-2025
    Local Time
    12:05 PM

    Barrel run in day

    Went to the Collie range today to run in my new 30" HART barrel on my 6.5 x 284 I took along my 308 custom build by Light Force - Ace Precision Rifle Systems (APRS), so I can have 10 minutes of fun doing some shooting whilst the cleaning fluid is working on the new barrel after each shot.
    This was 3 shot 100yds off a bench, bi-pod with rear sock (Garnet sand heavy stuff) the load has not been changed from the data Light Force supplied with the COA of the build, the only thing I have done is upped the scope from a 3.5 - 15 x 50 NXS to a 15 - 55 x 52 NXS Comp for 900M shooting at our local club.

    Used my MOA ruler I reckon its a .3 group maybe a tad smaller but the .3 is pretty good I have been having a pretty tough time of it with trigger release probably from shooting my mates 460 Weatherby Mag to much this has manifested in my groups getting the 3 o'clock flyer so my confidence in my ability has been somewhat shaken it is good to get a decent group for a change the rifle is brilliant its me sometimes.
    The handload is 42gns AR 2206H Hornady 168gn "A" Max 20 thou jump Lap case TTL 50.92mm BR-2 primer.
    This is the same rifle I used to win the state invitational Tactical shoot at Swanbourne fired from 600M it was not a cheap rifle but well worth the investment it's a G series and the last Rem-700 they did before going to STILLER actions for future builds. Rifle - Rem 700 G series action blue printed, Basix trigger, #9 Kreiger 26" Match grade Brl 1-10TR, 20MOA rail, Wild dog stock all ceracoated ODG

    And just a question what is it about the G series Rem 700's I have heard or read something about this particular series or am I imagining things again.......
    No groups from my 6.5 x 284 only used soft loads to run it in 43gns RE-22 behind a 120 SEIRRA 120gn SP.

    Thanks in advance P.S target orientation is correct way up, also a good fo par by me the range is in Yards & I marked the target in M oh well its 91.44M then.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by CINDERS; 01-14-2017 at 04:43 AM.

  2. Thank You to CINDERS For This Useful Post:


Similar Threads

  1. Converting a long Mauser 98 barrel to a K98k barrel
    By Claven2 in forum Gunsmithing for Old Milsurps
    Replies: 6
    Last Post: 08-03-2016, 01:24 PM
  2. Barrel Off Center in Front Barrel Band
    By GeeOwn in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 6
    Last Post: 07-10-2016, 11:26 AM
  3. Fitting a Lithgow H barrel to a no1 mk3* with a shotout barrel
    By ssj in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 06-11-2015, 10:33 PM
  4. No. 1 Mk III barrel replacement. Do or not do? Indian NOS barrel on a UK rifle
    By Steve762 in forum Gunsmithing for Old Milsurps
    Replies: 3
    Last Post: 09-13-2014, 01:31 PM
  5. Fast barrel/Slow barrel
    By William T. Watts in forum Ammunition and Reloading for Old Milsurps
    Replies: 10
    Last Post: 03-30-2009, 09:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts