Considering joining the club...

[82Trooper]

Hello all.....I am a relative newcomer here, but have the "bug"...
I am considering purchasing a Martini-Henry from IMA...

This is what I am considering:
https://www.ima-usa.com/collections/...d-and-complete

The thought of holding a piece of history in my hands is very appealing....the fact that it "could" have been at Rorke's Drift is almost irresistible...Anything I should look for as extra appealing or to stay away from?

Also, are these for real? Assuming a qualified smith gives the go-ahead to actually shoot the piece....
martini 577-450 to 45lc chamber adapter steel - Other Gun Accessories Parts at GunBroker.com : 792857156

As always...thanks for the advice I would not likely trust to ask for anywhere else.
Mike

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

are these for real?

Yes and that sort of thing helps when the rifle may not be up to shooting a full house load. Also cheaper than buying brass and dies and bullets...and learning to paper patch... Well, I did it anyway.

[82Trooper]

So I would assume finding a "local" Martini-Henry is unlikely.....how does one find someone competent to determine if a 140 year old rifle is safe to shoot? What even do they look for, other than the obvious cracks or defects? Does a headspace gauge even exist in this caliber?
Again, thanks in advance for any advice.
Mike

[browningautorifle]

how does one find someone competent to determine if a 140 year old rifle is safe to shoot? What even do they look for, other than the obvious cracks or defects?

That's about it, it turns into an opinion by someone with a licence to do just that very thing. If he specializes in military and antique it might be more to the point. I'd do it myself though, fit and finish, condition being everything. The sub cal would be far easier on the action anyway. I'm sure someone here can point you to someone that can provide headspace gauges...

[303 Gunner]

If you're more interested in the action and rifle itself and not so much the caliber, you could also look to pick up one of the W.W. Greener .22 conversions from the early 1900s. I have one and it's a joy to shoot and absolutely gorgeous to boot.

[82Trooper]

all right...you guys are talking me into this.....

as for the adapter...brass or steel preferred?

[browningautorifle]

Steel adaptors...brass is soft and can damage or stretch over time.

[82Trooper]

I like the idea of the adapter to .45LC .....still some bang, but at a much more reasonable price point. Original caliber ammo seems awful expensive, if you can find it...and I really do nt have the desire to hand load.
I will also look for the referenced .22 adapter...that's a cool idea, too. Are they available, in general? Are they affordable?

[browningautorifle]

the referenced .22 adapter

Not so much available and a collector's piece. I'd turn one myself using an old .22 rifle barrel...the back end would need an offset firing cap to fire the rimfire cartridge. Picture a piece that goes in behind the cartridge and has a nib on one edge. Then it all gets pushed out with a rod after firing. The barrel would be long...full length if I could manage. The chamber insert in .45 would be easier. Guess you could make a .22 insert about 12" long too...longer for accuracy. Barrels were also lined you know...I'd do one for a laugh in a common caliber like .30-30... Then it's centerfire and lower pressure. Still you'd want a good one for that, not one that came from the basement armory of the palace in Afghanistan...covered in Bat Guano.

[jamie5070]

The MK IVs generally are in better condition than the MK IIs. There is a man over on the britishmilita website that sells brass formed from magtech brass shotgun shells that are much cheaper than regular brass.
Reloading is really easy. I use 45-70 bullets and .470 ruger pistol die to neck size the cases. If you order one, I would state that you are wanting to shoot it just in case there is a questionable barrel on it. My MK IV had a mint bore and minimal pitting on the outside below the wood line. My MK II has a shootable bore and deeper pitting under the wood. All of the guns from the Nepal cache are a lot of fun to clean and shoot.
john