-
FREE MEMBER
NO Posting or PM's Allowed
Mauser question need answer asap please.
-
12-05-2011 11:14 PM
# ADS
Friends and Sponsors
-
Legacy Member
pictures? Also, generally speaking, unless it is an all matching k98 or you have a pretty beat up garand I would not consider that a fair trade. Typically, a russian capture 98k (the most common on the market) command about $300-$400 max while it is hard to find even a decent Garand
for less than $650. A matching 98k could certainly be worth around $1000 but we would have to see it. Of the two dates, I want to say there are a few known examples but I am not positive. I know there are dual contracter codes found on rifles but I am not sure about dates. You might be confusing a number code and a date? Pictures would be great if possible but be sure to find out if the numbers match on the 98k or you might be getting the proverbial short end of the stick...
Cheers!
-
Thank You to m4a3sherman For This Useful Post:
-
-
FREE MEMBER
NO Posting or PM's Allowed
ok well i did the trade, pics tommorow here is what I got. The metal on the gun is free of rust and the riflings are in excelent shape. The swasticas are clear and not worn down. All numbers match. Barrel, stock, and reciever. It even has the original sling with it. The stock itself has worn areas and scratches on it. Plus it even has an original sling. Even got a bayonet with original case, but it is pretty beat up. All in all it looks like a great rifle. Plus I didnt see a second date stamp. The date is 1940.
The m1 was a 44 bolt, 51 recieved and barrel and had a refinished stock. Plus someone electric penciled numbers into the bolt and the rifleings were about shot.
-
Legacy Member
Ah well we eagerly await photos! Take note that on rifles made around 1940, virtually EVERYTHING will be numbered to the rifle. Screws, bands, rear sites, stock, you name it!
-
-
Legacy Member
Does not sound even to me. Waiting for pictures of both.
-
-
FREE MEMBER
NO Posting or PM's Allowed
Mauser used S/42, then 42, and the byf as their manufacturer code. That may be what you are calling a date.
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
Johnny Peppers
Mauser used S/42, then 42, and the byf as their manufacturer code. That may be what you are calling a date.
No it is stamped on top 1940, I'll get the pictures of both, also where is the serial number? If it even has one.
---------- Post added at 06:18 PM ---------- Previous post was at 06:17 PM ----------

Originally Posted by
m4a3sherman
Ah well we eagerly await photos! Take note that on rifles made around 1940, virtually EVERYTHING will be numbered to the rifle. Screws, bands, rear sites, stock, you name it!
I noticed. Even the bolt matches as far as I can tell without taking it totally apart is that it is all original. See the value difference doesnt mean a whole lot to me, well it does some, but this rifle will be used to hunt with. The M1
was just too heavy.
-
Legacy Member
Serial number will be on the left side of the receiver ring. Let me be the first to beg you NOT to scope this rifle for hunting!!!
-
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
m4a3sherman
Serial number will be on the left side of the receiver ring. Let me be the first to beg you NOT to scope this rifle for hunting!!!
Left side of the reciver ring? Only thing there is 273 which is the matching number. Oh trust me I wouldnt scope something like this. I got it mainly for bad weather hunting. Scopes tend to fog up.
-
FREE MEMBER
NO Posting or PM's Allowed