Ihc #4586992

[GUTS]

I got bored so I thought I'd finally post some pictures of my IHC. After I cleaned it up it looks okay, as long as you don't open it up and see the inside of the stock. The left side of the stock is considerably lighter than the right side.

















I also got these loaded back up from shooting my 5.9 mill SA. I'm ready for another day at the range.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

I'd just get a stock and be off. The gun looks flawless and if you can't do a bed job to repair that one, just get another. All that ammo can't be just left there to rot...it only has a life of a couple days after all. Then it's useless. You have to shoot it NOW!

[GUTS]

I can't, it's snowing again.

[browningautorifle]

it's snowing again

Bummer...

[John Wyatt]

The receiver and barrel appear to have their original finish, which is in nice shape. What is the make-up if the rest of the parts?

[GUTS]

Here is how she breaks down.

Op rod: D-6536382 IHC
Bolt: D6528287 IHC
Trigger housing: IHC D6528290
Hammer: 5546008 IHC
Safety: F
Hammer spring plunger: No wings
Rear sight housing: unmarked
Elevation knob: IHC
Windage knob: DRC
Follower: 12 marked SA
Follower arm: unmarked, possible IHC
Follower rod: unmarked, possible IHC
Follower arm pin: undercut
Op rod catch: unmarked, possible IHC
Bullet guide: WWII milled
Gas plug: P x

Here are the parts I'm not sure of.

[bearrowland]

That's a fairly decent IH makeup from the parts you listed. That's a handsome rifle sir! I'd love to have those rounds you loaded up for mine right now!!