-
Advisory Panel
Stroke of Luck- New Toy
Last week I had the good luck to be offered a Parker Hiscock magazine. I've seen a couple come and go over the years, and scoring one had been high on my list ever since I found out about them early in my serious collecting days.
I couldn't say no, and today it arrived. Very happy with it. It is complete, in v good condition with components all matching numbers. I can't wait to get it to the Small Bore range and try it for myself. I fitted it up to the Patt14 No1 .22 Trainer for a pic earlier.
Cross off one more Holy Grail 
Attachment 44475
Attachment 44476
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 22 Members Say Thank You to Son For This Useful Post:
5thBatt,
Alan de Enfield,
Arthur OZ,
ArtioZen,
Badger,
bigduke6,
Brian B,
Brian Dick,
conec,
Frank LE,
gsimmons,
HOOKED ON HISTORY,
jmoore,
Mag Fed,
mrbungle,
Patrick Chadwick,
rambo46,
RangeRover,
Roger Payne,
Steve H. in N.Y.,
tbonesmith,
Vincent
-
07-15-2013 10:48 AM
# ADS
Friends and Sponsors
-
Advisory Panel
Very neat piece of kit. Not often seen...
-
-
-
Contributing Member
LIFE IS GOOD!!
Congratulations!!
-
-
Legacy Member
Very good luck indeed. Well Done!
-
-
Legacy Member
Cpt Hook strikes again, not jealous '''''''''''''' Much
-
-
Legacy Member
does the Parker hiscock mag work in a regular No.2 Mk 4 .22LR or does it have to have a specific bolthead arrangement?
-
-
Legacy Member

Originally Posted by
newcastle
does the Parker hiscock mag work in a regular No.2 Mk 4 .22LR or does it have to have a specific bolthead arrangement?
No, the underside of the bolthead needs to be beveled.
-
Thank You to 5thBatt For This Useful Post:
-
Legacy Member
I found even with the correct bolt head they don't cycle smoothly.
-
-
Legacy Member
theoretically though, the beveling of a standard .22 Pattern 14 trainer bolthead should make it work.
-
-
Contributing Member
Anyone have drawings on the appropriate location and angle for the beveling of the bolt head? I have a complete mag and would like to try it in a rifle if I could modify a spare bolthead.
Thanks,
Brian B
-