Morris Tubes

[harry mac]

What is the legal status of a .297/.230" Moris tube in UK? Are they classed as an obsolete chambered firearm, the same as it would be if it was a complete rifle, or does being a barrel on its own somehow make it a Sect 1 firearm?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[bigduke6]

Harry, I think it a catch 22, the fact the calibre is obsolete is one thing but the fact it will fit into a .303 chamber is another, myself I'd class it as an obsolete conversion unit but its what your local force class it as.......

In recent times Section 58 firearms have had a bad press, obvious for reasons I won't go into but, an obsolete calibre firearm is just that, an old barrel chambered in an obsolete calibre is a component from an obsolete firearm, a new made obsolete calibre barrel is a section 1 firearm part..... but an old barrel in an obsolete calibre that will fit a Section 1 firearm ........... I couldn't say.

[harry mac]

Harry, I think it a catch 22, the fact the calibre is obsolete is one thing but the fact it will fit into a .303 chamber is another, myself I'd class it as an obsolete conversion unit but its what your local force class it as.......

In recent times Section 58 firearms have had a bad press, obvious for reasons I won't go into but, an obsolete calibre firearm is just that, an old barrel chambered in an obsolete calibre is a component from an obsolete firearm, a new made obsolete calibre barrel is a section 1 firearm part..... but an old barrel in an obsolete calibre that will fit a Section 1 firearm ........... I couldn't say.

That's sort of what I was thinking too. I just don't know, at present, if the one I've seen is for a .303, or a 577-450 parent rifle.
I am fully aware, though that if I fit it in ANY firearm, obsolete or not, with the intent of using it, it needs to be on my FAC.

[RobD]

I agree, Harry - if one were to alter an obsolete firearm I think it would excite the local firearms officer.

[Stanforth]

The other thing to ask yourself is 'Why do I want it'. If the answer is to use, you will certainly have to have it on your FAC and authority to purchase ammunition.
If your reason is to add to a collection of Enfield Rifles and be held as a 'Curiosity or Orniment' that is a different matter but you could still fall foul of the law as the fact that you would own both the rifle and Morris tube coild be interpited as 'intention to use'.

My recommendation would be get a variation, buy it and load your own ammo using .22Hornet cases .22 pellets (the heavy ones for FAC air rifles) and a set of .297/.230 dies.
Been there, done that and it works well.
Good luck.

[harry mac]

If your reason is to add to a collection of Enfield Rifles and be held as a 'Curiosity or Orniment' that is a different matter but you could still fall foul of the law as the fact that you would own both the rifle and Morris tube coild be interpited as 'intention to use'.
Good luck.

I "believe" that, in that case, the absence of ammunition could be held to confirm its curiosity/ornament status.
If I did decide to get it, it would end up on my FAC anyway (if I can persuade the FEO that I've got good reason).
I'm just waiting on an answer from the vendor at the moment as to what its legal status is, and what rifle it's intended to fit.
When all's said and done I NEED to NOT buy it, as it will eat int my Swedish Mauser fund; and that's growing painfully slowly as it is.

[Peter Laidler]

First things first. A BARREL per-se is a firearm in its own right, as defined in law as a thing capable....... blah blah blah and so on. Whether it fits inside another rifle or fits into a 25 pounder or MOBAT or WOMBAT (to act as a 'bang maker' ) or whatever shell case for whatever reason is purely academic. If the barrel falls into the category of 'obsolete calibre' then by default AND definition it is, of itself an obsolete calibre firearm in law. You can't have a 'half' a firearm......... It is or in this case, it isn't one requiring a certificate. You - or the vendor - can make it as simple or difficult as you like.

[bigduke6]

Problem is Peter, each Force interprets the law in different ways, Its bit like Section 7.1....... I had no bother in obtaining mine, but I was told by a forum member a dealer down south had to jump through a few hoops due to him dealing in Ammunition........ although that was part of his business it should not have had anything to do with his own FAC.

As in post#2 I would class it as a obsolete conversion unit, but its what the seller has it down as, if its on his RFD or FAC then it can be a bit of nightmare.........

[Peter Laidler]

Point taken of course Big Duke, but the law has been defined here. It is simply a sub calibre insert in exactly the same way as an L12 insert is. But this one IS AN OBSOLETE CALIBRE as defined in statute. If a dealer has it on his books as a 'certificateable' firearm, he just corrects it - as he would any other firearm wrongly entered and that's it. I could be wrong of course

[Stanforth]

The answer is (or maybe?)
It is an obsolete calibre and can be held without any formality providing that the holder is not disqualified by having a criminal record.
Problems only arise when he fits it in his rifle.
If he intends to shoot it he will require an entry on hid FAC anyway.