New Mauser C96

[RossMkIIEnjoyer]

Always thought these pistols were neat as could be. Also that they're worth a pretty penny and most affordable ones are pretty rough so I wasn't expecting to buy one or looking, really. Went to sell a couple cheap guns that weren't interesting me anymore (not milsurps) and instantly knew I wanted it as I saw it. Looked fine, obviously been refinished but seemed in decent order and came with two boxes of 7.63 Mauser. Got it home and took one shot. Nice, very soft recoil. Then realize I can't see my front sight for the second. It flew off.

The dovetail looks buggered. Bad old repair I think. What concerns me most are the two holes drilled into the barrel. Not sure the barrel is safe to shoot. Disappointing to say the least. Glad I own and experienced the pleasure of firing one (shot), even if it's just an expensive paperweight at the moment. Probably the most enjoyable handgun I've shot so far.

[tiriaq]

I would just install a banded front sight. That would result in a usable sight and the current misery would be hidden.

[browningautorifle]

Looks like the barrel has been cut down and that sight added. If there's no obstruction in the barrel, it's fine. Even a screw hole into the barrel won't give problems. Yes, a banded sight if you can find one...

[Ovidio]

Looks like the barrel has been cut down and that sight added. If there's no obstruction in the barrel, it's fine. Even a screw hole into the barrel won't give problems. Yes, a banded sight if you can find one...

Exactly my thought. There is a good bit of barrel missing.

[MAC702]

That explains it. As soon as I opened the thread and saw the thumbnail, but first thought was: "Dang, I've never seen one with a short barrel like that." Doesn't mean it couldn't be original, just that I'd not seen one. It does seem the jive with the bad job done installing the new front sight, too.

I picked up a nice .30 model a few years ago. A good friend of mine wanted it WAY more than I did. I got it for a song, and he gave me full value. I still kinda miss it, but it paid off my truck at the time.

[Low & Slow]

Hammer is pre-1900 cone style. Interesting. Any Turkish markings?

[browningautorifle]

Hammer is pre-1900 cone style.

I saw that, early type. Nice...those were always worth stripping just to look inside and see if they were still in the original hand blued finish. Even if no finish remained. If they were ever dropped in a tank they'll show it. Originals are mint white inside.

[tiriaq]

Making a banded front sight isn't all that hard with access to a lathe. The barrel is tapered. Bore out a piece of tube until it just starts onto the barrel. Tap it further on. Tap around the circumference. This will expand the tube and loosen it. Tap it further on. Repeat until the tube covers the misery. Drive it on a bit further. It should be tight on the barrel. Tap the tube off the barrel, cut it to length. File a flat. Silver braze on a small block of steel. Cut a small dovetail for a Mauser type front sight. Drill and tap a hole from the dovetail down through the sight base. Install a set screw. Tap the base onto the barrel, lock it in place with the set screw. It will probably hit the flat filed in the barrel. Install the front sight.
The above is simplified but you get the idea. It works.
The unit should be finished prior to final installation. The appearance is very much like the front sight mount on a Mauser rifle.

[RossMkIIEnjoyer]

Admittedly I didn't know much about them when I bought it. Know a bit more now, still not much. I'd have still bought it as a parts gun. Stripped down now I can see the all numbered parts match, 4451. Looks like it's an 1897 production. No Turkish markings, only stamps are from Mauser and proof marks. Lower is blued inside also so probably it was a reblue as I suspected by the machine marks being polished away on the outside. Barrel has definitely cut down. Rifling looks OK kind of shallow. Grips are reproduction and fit very poorly. Debating sending off the pistol to Luger Man and have him replace the barrel and restore the pistol. Not much collector's value is there already with the reblue and messed up barrel so might as well make it a looker and shooter. Also, it really makes me appreciate the ease of disassembly of later pistols. Hahaha. But it really is a thing of beauty. Everything is machined.

[browningautorifle]

Debating sending off the pistol to Luger Man and have him replace the barrel and restore the pistol.

I would do that if you can. That will take all issues away.