M4 Bayonet question

[kikokat]

I'd appreciate opinions regarding a Case M4 bayonet I'm looking at. Does the blade shape/configuration look correct? Top of the blade seems to be cut a bit different than my other M4s....at least from what the pics show.
Thanks for any input.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[SKIPH]

Kikokat- Looks good to me.If you're talking about the back-cut on the top edge of the blade. Most M4's and M3's are ground that way. Now, I have seen Utica M3's with the back-cut w/ less of a curve, which sometimes gets hung up when you put it in an M8 scabbard. SKIP

[kikokat]

Thanks, Skip. That's what I was referring to. It seemed to have a bit more radical "cut" to the back cut on top than my others. I did wonder if perhaps the photo/lighting may have accentuated that look.
Appreciate your input.
John

[JimF4M1s (Deceased)]

Looks good. Square cut and no plastic spacers.

What is the blade length? That might let you know if it had been reground, then reparked.

[kikokat]

Good question Jim. I'll have to find out.
Thanks!