+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: PU Sniper

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member Ridolpho's Avatar
    Join Date
    Jan 2012
    Last On
    09-27-2022 @ 11:12 PM
    Location
    Province of Alberta, Canada
    Age
    66
    Posts
    1,019
    Local Date
    06-08-2024
    Local Time
    05:49 PM

    PU Sniper

    Just had a chance to give a '43 Tula (refurb) an initial test. This is one of the ones refurbished post WW2 that are not supposed to be collectable. I don't know why- a No. 4T or '03A4 that was arsenal rebuilt is still pretty desirable. Perhaps the sheer number of these is the issue? It has matching (deep stamp) bolt/ action body. Triggerguard is restamped to match. The scope number is stamped on the left side of the barrel right above the wood. The scope mount base is very nicely installed. Anyway, I bought it to shoot and finally got a chance to put a few rounds through it at the ancestral Ridolpho shooting range in Saskatchewan. Tightened the scope bracket into the mount, set everything at "zero" and it got right onto the bullseye at 100 yards shooting prone off a mat. I shot 5 but only 4 are visible- didn't have a called flyer so either had a "dud" round or 2 bullets through one hole. Rushing to avoid being eaten alive by mosquitos I backed off to 300 yards and set the range accordingly and was shocked to find 4 of 5 on the paper. I haven't shot prone much and was having a heck of a time getting a consistant chin-weld but this combo appears to have good potential and I'm anxious to get it on a proper bench rest for more testing. These rifles were obviously set up pretty well during the refurb- post is dead center in the scope and cross hair drops to center at about 600 meters setting. Fun shooting and not nearly the recoil of D-Bombs carbine!

    Ridolpho
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 4 Members Say Thank You to Ridolpho For This Useful Post:


  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    SVT-40's Avatar
    Join Date
    May 2013
    Last On
    06-22-2014 @ 08:07 PM
    Location
    Quebec
    Posts
    62
    Real Name
    Nick
    Local Date
    06-08-2024
    Local Time
    07:49 PM
    Very nice rifle, congrats. that is an original sniper with a SVT-40 scope you can tell by the bigger end of the scope . Another way o tell it's a sniper issue other than having the scope serial number stamped on the side is by having C H stamp above the Tula star. I see yours has the C . the H was probobly not struck well. The CH stamp was the stamp of approval for sniper rifles. it was picked out by there testers (sharp shooters), only the most accurate ones had the CH stamp

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    06-08-2024
    Local Time
    06:49 PM
    Nice shooting,what ammo did you use?

  6. #4
    Legacy Member Ridolpho's Avatar
    Join Date
    Jan 2012
    Last On
    09-27-2022 @ 11:12 PM
    Location
    Province of Alberta, Canada
    Age
    66
    Posts
    1,019
    Local Date
    06-08-2024
    Local Time
    05:49 PM
    Thread Starter
    Warpig: I was using "prvi partizan", FMJ, 182 gr. It sells up here for pretty reasonable prices. I was interested to note that there was a bit of obvious fouling after 5 rounds but virtually none after 30. If I didn't mention in the original post, the bore on this rifle is fantastic. Trigger pull, on the other hand, was vague, if not heavy. Very different feel from the Lee Enfields I am most used to.

    Ridolpho

  7. #5
    Legacy Member WarPig1976's Avatar
    Join Date
    Jan 2013
    Last On
    01-30-2023 @ 05:49 PM
    Location
    Delaware county, PA just outside Philadelphia.
    Posts
    2,659
    Real Name
    Jeff
    Local Date
    06-08-2024
    Local Time
    06:49 PM
    I see, might I suggest polishing all contact points on the trigger group. It's amazing what that does to improve a MN trigger pull. I haven't used a gauge but the difference is huge.
    The problem with the MN trigger is milling marks and it's crude,not much can be done for that but we can knock the milling marks down without fear of creating an unsafe trigger.

  8. The Following 2 Members Say Thank You to WarPig1976 For This Useful Post:


  9. #6
    Legacy Member big bear's Avatar
    Join Date
    Jan 2008
    Last On
    02-08-2023 @ 12:42 PM
    Location
    British Columbia
    Posts
    92
    Local Date
    06-08-2024
    Local Time
    03:49 PM

    which vendor?

    Which vendor did you get your nice TULA from?

  10. #7
    Legacy Member Ridolpho's Avatar
    Join Date
    Jan 2012
    Last On
    09-27-2022 @ 11:12 PM
    Location
    Province of Alberta, Canada
    Age
    66
    Posts
    1,019
    Local Date
    06-08-2024
    Local Time
    05:49 PM
    Thread Starter
    Bigbear: The nice folks at PS Militaria in Quebec. I've bought a few nice rifles from them.

    Ridolpho

  11. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Devious6's Avatar
    Join Date
    Mar 2009
    Last On
    11-03-2017 @ 07:54 PM
    Location
    Dalton, PA
    Posts
    52
    Local Date
    06-08-2024
    Local Time
    07:49 PM
    I have two "43 Tulas - one just like yours and one a restored ex-sniper. Your rifle is just as collectible as any other refurb PU - don't let people run it down. These rifles command the same amount at gun stores and shows as other PU imports. Nice rifle!!
    Mark V
    COL, USA (Ret.)

  12. #9
    Legacy Member Ridolpho's Avatar
    Join Date
    Jan 2012
    Last On
    09-27-2022 @ 11:12 PM
    Location
    Province of Alberta, Canada
    Age
    66
    Posts
    1,019
    Local Date
    06-08-2024
    Local Time
    05:49 PM
    Thread Starter
    Devious6: Thank you, Sir! The comment about the limited collectability of these is made in the Lapin book but glad to hear your thoughts. It's kind of nice to still see fairly low prices on Mosins (including sniper variants) given how crazy things are getting in the world of Springfields, Lee Enfields, Garands, etc. It's also nice to buy something with minimal expectations and to be very pleasantly surprised by solid quality and functionality. I'm registered in the "Ross Rifle Shoot" here in July and may just use this rifle instead of one of my No. 4T's in the scoped class.

    Ridolpho

  13. #10
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    06-09-2024
    Local Time
    01:49 AM
    Quote Originally Posted by Ridolpho View Post
    I'm registered in the "Ross Rifle Shoot" here in July and may just use this rifle instead of one of my No. 4T's in the scoped class.
    Do it!

    And here is something to encourage you:

    https://www.milsurps.com/showthread....446#post262446

  14. Thank You to Patrick Chadwick For This Useful Post:


+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. USMC M-1941 sniper Unertl Sniper rifle
    By Boom-Boom in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 11-08-2010, 11:15 AM
  2. WWl Sniper with 1903 and ID of sniper.
    By A. F Medic in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 13
    Last Post: 07-17-2009, 06:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts