Introduction

[Rdavis]

Been surfing around for a good collectors forum & this one looks good. I have a small collection that I have been working on for a few years. Here's my carbine a fairly low # Winchester, has all win. parts except for the stock which is a Rock- Ola. Is an I cut stock correct for this serial range of Winchester?
11065xx

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Bill Hollinger]

Welcome aboard Davis. Glad to have you with us.

[painter777]

I have a note scratched down here that has I cut Hi-woods on WRA up to about 1,153,591. Oval cut Hi-wood came in at about 1,067,649 until end of first serial # block. So some overlap should be expected until the I cuts were used up.

That's what my note say's anyway....

Welcome

Charlie-painter777

[painter777]

P.S.
We love pictures !!

Charlie

[Rdavis]

Thanks for the info. I think I am going to enjoy this forum. I'll post more pictures in the future.

[Ed Johnson]

Welcome aboard. This is a great source of information. We have many real experts here who are always willing to help or share information.
Good Shooting,
Ed

[Tired Retired]

Welcome to the board! These folks are great and I have learned so much info from just reading some of their posts over the last few months.

Oh, I suppose no one told you that there is a "newbie" picture post requirement? All newbies have to post at least 12 pictures of each of their Carbine... so get posting!

Seriously, welcome to the family and enjoy the club!

[Harlan (Deceased)]

Welcome Rdavis! You'll not find a better group of knowledgeable gentlemen anywhere.
These guys really know their stuff.

[stonewall56]

Welcome, rdavis. Good guys here, I learn something new almost every day.