Thought some of you might like to see some pictures of this.
Attachment 63183Attachment 63184Attachment 63185Attachment 63186Attachment 63187Attachment 63188Attachment 63189Attachment 63190Attachment 63191
There is very little material that gets removed. So I decided to do it by hand.
Cleaned the chamber really well, then filled it with cutting foam and coated the reamer. Ream a little, clean out the chips, and repeat. I dropped a round in to show the progress. Just as I neared the end I went very slowly and lightly, removing very fine flakes that looked like dust.Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.