I've been trying to find out what weapons were issued to Co. A of the 10th New York Volunteer Infantry Regiment and the 10th New York Veteran Volunteer Infantry Battalion during the American Civil War. The reason is that I have been and still am a reenactor for that unit. Currently we use a quite inaccurate mixture of M1861 Rifle-Muskets, P-53 Enfield Rifle-Muskets, rifled M1842 Percussion muskets, and the Remington M1862 rifle. The Springfields and Remingtons predominate, because those were often the cheaper of the ones listed, and also because through reading the regimental history it was determined that the Springfield was issued sometime between November 1862 and January 1863 to the line companies and thus would have been used during 1863, the year we mostly portray; the history also states that while at Ft. Monroe, probably in February, the flank companies (which based on the infantry tactics of the day are assumed to be Cos. A and B) were issued what are only described as "Remington rifles," which were assumed to be the M1862 at first.
Recent research turned up new information. The issuance of the M1862 rifles was found to be most unlikely. While attempts were made in 1862 to fulfill the Federal contract, not enough could be made, so deliveries were initially made in 1863. It is most unlikely that any of the few weapons made would have been sold to the State of New York before deliveries to the Feds could be made. This seemed to rule out the M1862. What I found out, though, was that Remington in the 1850s produced M1841 percussion rifles under contract for the Federal government. At the start of the Civil War, 5,000 Remington produced M1841s were given to the State of New York for issuance to volunteer units. One of the units I have confirmed were issued these in 1862 is the 10th New York.
New York issued a contract to Remington to alter these rifles by converting them to .58 caliber, replacing the ramrod with a one-piece one better suited for .58 caliber Minie balls as opposed to .54 round patched balls, and adding a bayonet lug of the 1855 type with no rails for the 1855 style saber bayonet made by Collins & Co. of Conneticut. Due to the inability of Collins & Co. to deliver enough bayonets, Remington had to end the contract early, after only having delivered 3,268 rifles so converted. New York then had a NYC gunsmith named F.H. Grosz complete the contract. It seems they may not have replaced all of the ramrods with a better type, and that the reboring may have been already done by Remington, but the biggest difference is in the bayonet. The rear sight was moved back and the muzzle turned down in a lathe to fit an M1842 socket bayonet, the stud for which was brazed on under the barrel. The bayonets were government manufactured, but were issued with a peculiar frog and scabbard. New York units at Ft. Monroe prior to the Peninsula Campaign were issued both conversions, some units being issued both types, both within the regiment and within the company.
What I would like to know is how I may find out which type was issued to the 10th New York, the Remington or Grosz conversion, or both, and which companies were the flank companies, as well as whether the two companies were equipped differently. Co. A in all probability was a flank company, but I cannot absolutely confirm this. I'd also like to know if these were retained when the Springfields were issued, or if only the line companies recieved these in exchange for their M1842 percussion muskets, and also when the Springfields were issued. I'd also like to know what the impact on armament and organization (line vs. flank companies) the change to a 4-company battalion was when the change was made in mid-1863 following the discharge of the 2-year men.
I'd like to know what ways this information can be had, or if anyone here has access to such resources or knows or can quickly ascertain the answer to these questions. This will of course impact how we portray the 10th when it comes to armaments and such. So far I simply cannot find this information or even a way to get it.Information
![]()
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.