PEM scope/enfield

[RJW NZ]

I seem to remember a few random thoughts a while back about fitting a soviet pem scope to an enfield, I found a couple of pics of one fitted to a T mount, I think this was on gunbroker a while back. (Century created T)

Its seems there's a few issues causing it to be mounted so far rearwards, the distance between the T mount rings is a bit too wide to fit easily on the scope, about 3/4 inch or so, remembering that the no32 scope has the turrets forward of the front ring. If the PEM tried this the T mount might be too wide to fit between the focus end and the turrets, I'd have to get the calipers across these pictures to measure it up.

This scope is the '1937' model with slightly forward set turrets, another more modern model has mid set turrets and might mount better...

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Surpmil]

Would be a good combination if the PEM had index clickers on the drums. Better than the MN sniper or the No4(T).

The scope is a repro PEM. The focus dials on the originals were alloy and for some reason they used steel on the reproductions.

[No4Mk1(T)]

Would be a good combination if the PEM had index clickers on the drums. Better than the MN sniper or the No4(T).

The scope is a repro PEM. The focus dials on the originals were alloy and for some reason they used steel on the reproductions.

Would one of your L42 night sight mounts be adaptable to work for this?