How to zero the No32Mk3 Scope

[Riflechair]

Hello everyone
I have a minty 1944 M47C No4Mk1T but I need to zero the scope (No32Mk3). I don't want to barge in and start making assumptions.

So with that in mind how do I best educate myself on this subject? Currently walking on egg shells. Bracket is serialed to the rifle.

Richard

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Peter Laidler]

BDL sells a little book about them and I believe that it's in there. Treat yourself..................

[Beerhunter]

BDL sells a little book about them and I believe that it's in there. Treat yourself..................

Good Call Peter.

[Riflechair]

OK I picked it up from Brian
Cheeky Monkey

[Peter Laidler]

As I have zeroed in one or two No32's in my time, maybe I ought to do a short article about it. The problem is that you can very easily come unstuck, especially with the Mk3/L1A1 if the unwary unwind ..... and unwind until the lead screw nut drops off the leadscrew...............