+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Stevens 520-30 choke

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member nhetzer's Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2024 @ 10:38 PM
    Location
    Ohio
    Posts
    181
    Real Name
    Nick Hetzer
    Local Date
    06-18-2025
    Local Time
    06:14 AM

    Stevens 520-30 choke

    I recently acquired a Stevens 520-30 riot gun for a bargain price. It's all matching and correct EXCEPT.... that someone installed a polychoke on the end at some point in it's life. Is there any way to get this off without cutting the barrel? How were they put on? I don't see any threads so I am thinking it was basically sweated on maybe? I don't know anything about these chokes and I foolishly believed that it would be "no problem" to get it off. Yeah. One of those "Oh, come on, how hard could it possibly be?" So now I appeal to the masses as to what I should do. I hate to cut the barrel and ruin the historical integrity. I would almost rather have the barrel refinished if I can get it off so the finish will match. Tough call. Advice?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Advisory Panel breakeyp's Avatar
    Join Date
    Jul 2007
    Last On
    06-13-2025 @ 05:42 PM
    Location
    near Detroit Michigan
    Age
    78
    Posts
    971
    Real Name
    Paul Breakey
    Local Date
    06-18-2025
    Local Time
    07:14 AM
    I have seen a few riot shotguns fitted with variable choke devices set up by Army unit funds. They had access to the riot guns, paid for the chokes and issued them to members for local hunting. Depending on location, some units had .22 target pistols, shotguns and commercial hunting rifles.

    About 1971, I bought three Hi Standard .22 target pistols from an adjacent infantry unit's fund in the Panama Canal Zone. They were also selling Model 12 Winchester riotguns with variable chokes if I remember correctly but was outbid.

    Of course unless you have paperwork, there is no way to prove that your gun came from a unit fund. For what it's worth. p.

  3. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    blackjackdelta's Avatar
    Join Date
    Mar 2012
    Last On
    03-14-2012 @ 11:48 AM
    Location
    Washington
    Posts
    10
    Local Date
    06-18-2025
    Local Time
    03:44 PM
    Quote Originally Posted by breakeyp View Post
    I have seen a few riot shotguns fitted with variable choke devices set up by Army unit funds. They had access to the riot guns, paid for the chokes and issued them to members for local hunting. Depending on location, some units had .22 target pistols, shotguns and commercial hunting rifles.

    About 1971, I bought three Hi Standard .22 target pistols from an adjacent infantry unit's fund in the Panama Canal Zone. They were also selling Model 12 Winchester riotguns with variable chokes if I remember correctly but was outbid.

    Of course unless you have paperwork, there is no way to prove that your gun came from a unit fund. For what it's worth. p.
    What I have learned so far depending on the configuration and SN it could be an AA practice shotgun used to train gunners during WW2. Once trained they would switch to the 30 cal or Ma duece.
    I did not notice your thread, I have one going at the same time.

    Jack

  4. #4
    Legacy Member nhetzer's Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2024 @ 10:38 PM
    Location
    Ohio
    Posts
    181
    Real Name
    Nick Hetzer
    Local Date
    06-18-2025
    Local Time
    06:14 AM
    Thread Starter
    Hmmmm.... that's food for thought. I've seen police departments selling them off in the same configuration. I know that they usually get military surplus and thought it was strange that they all had the same choke on them. That explains a lot. Either way, I got this one for about $170 so I really don't have room to complain either way. Thanks for the info!

  5. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Aye KAY's Avatar
    Join Date
    Nov 2009
    Last On
    02-23-2011 @ 12:41 PM
    Posts
    19
    Local Date
    06-18-2025
    Local Time
    05:14 AM
    I had a Remington Model 10-R with all the military markings that had a poly choke on it.

  6. #6
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    06-13-2025 @ 06:52 PM
    Location
    Denver Co
    Age
    62
    Posts
    3,199
    Real Name
    chuck
    Local Date
    06-18-2025
    Local Time
    05:14 AM
    aftermarket chokes of the day, were installed many ways,,fine threads{most common} silver solder, brazing, and epoxy.
    i have removed and recut many a riot and trench gun.. only a couple was i lucky enough to have a epoxied choke..it still had the original hole for the factory bead under it.
    most have to be cut back at least 1/2 an inch, and a new bead installed.
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  7. #7
    Legacy Member jeep's Avatar
    Join Date
    May 2009
    Last On
    10-01-2024 @ 04:37 PM
    Posts
    225
    Real Name
    Dave
    Local Date
    06-18-2025
    Local Time
    07:14 AM
    A martial marked 520 with correct markings will bring 1700-2400 dollars today. Lots of these guns were sold surplus and bubba would polychoke them for hunting and chop them up and make turkey card shotguns out of them. In the 1950,s and 1960 many were bubba-rized. Collecter guns junked and the same with surplus boltguns. The last 520 roit I sold I got $1750.00 for it. And it was a police trade in.

  8. #8
    Legacy Member nhetzer's Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2024 @ 10:38 PM
    Location
    Ohio
    Posts
    181
    Real Name
    Nick Hetzer
    Local Date
    06-18-2025
    Local Time
    06:14 AM
    Thread Starter
    Wow. $1750 for a Stevens riot? Where do you live? I have two 520-30s and a 620. None of which I paid more than $350 for. I paid $220 for my matching, beautifully conditioned 620 riot less than a year ago. Yeah, that was a find but they're out there!
    I live in southern Ohio and we have a plethora of gun shows around here, one every weekend. So my opportunities to find deals I guess are a little better than someone who lives in an area that only gets one show every couple of months. I've seen comlpete Stevens trench guns go for that kind of money. Sure I've seen them higher at the bigger shows and of course condition is everything.

  9. #9
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    06-13-2025 @ 06:52 PM
    Location
    Denver Co
    Age
    62
    Posts
    3,199
    Real Name
    chuck
    Local Date
    06-18-2025
    Local Time
    05:14 AM
    i was thinking kinda the same thing myself...id sell every Savage military shotgun i have, show me the money...heck last time i checked, i had 10 or so Riots, trainers, and a couple trench guns..
    warpath metal finishing contact info.
    molinenorski@msn.com
    720-841-1399 during normal bus, hours.

  10. #10
    Legacy Member nhetzer's Avatar
    Join Date
    Mar 2009
    Last On
    01-14-2024 @ 10:38 PM
    Location
    Ohio
    Posts
    181
    Real Name
    Nick Hetzer
    Local Date
    06-18-2025
    Local Time
    06:14 AM
    Thread Starter
    Wow Chuck, your collection is a biiiiiiiit more extensive than mine! I'm but a lowly beginner of a collector and only have a few shotguns. I have the above mentioned Stevens and I just picked up a Model 11 trainer. Only one trench in my collection and it's a parts gun with the wrong heat shield on it. Not worth much to a true collector but it has a home in my gun cabinet. Someday I'll sell a kidney or something and set out to find my Winchester Model 97. Until then I'll keep scouring for the gun show finds!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Stevens 416 Bolt
    By na80 in forum .22 Smallbore
    Replies: 3
    Last Post: 04-22-2018, 02:04 PM
  2. Stevens parts?
    By nhetzer in forum Military Shotguns
    Replies: 14
    Last Post: 01-18-2012, 11:25 PM
  3. New Stevens 416
    By Calfed in forum .22 Smallbore
    Replies: 4
    Last Post: 06-22-2010, 01:15 AM
  4. stevens 77E
    By raburrows2001 in forum Military Shotguns
    Replies: 3
    Last Post: 01-25-2010, 10:10 PM
  5. Stevens 620
    By coneten in forum Military Shotguns
    Replies: 6
    Last Post: 08-22-2009, 12:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts