In the attached files are pictures of my .22LR Parker Hale CMT-2 from around 1937.
The base action and stock are from an Artillery Carbine A.C. 1 (you can just see the C.1 on the side of the action in one of the pics) which has the VR crown etc. but most of the markings have been removed. It also has Victorian inspector marks on all the receiver parts and stock and may date from 1885.
The left hand side of the receiver has been stamped by CG Bonehill as being made for the Society of Miniature Rifle Clubs (again you can just see it in the photos). This has been partially erased. The SMRC was a Victorian society to improve rifle marksmanship and commissioned a number of rifles in .22LR in around 1900 to be made from what at the time were cheap surplus rifles and parts.
CG Bonehill of Birmingham had a large contract with SMRC and these are fairly common in different configurations.
The CMT-2 stamped on the barrel and the proof marks show it was in the Parker Hale factory in 1936 and 1937, being sold sometime thereafter. The barrel is maybe a new one as it has no earlier proof marks and is narrower than the barrel on my 577/450 Mk II. However this is not conclusive and it has been parkerrifled. You can just see the concentric circles at the breech end where the insert has been, well what can I say, inserted.
I understand Parker Hale were selling converted Martinis as the Converted Military Target rifle and were buying up rifles used by the SMRC in order to convert them. Again this was a cheaper target rifle for the less wealthy shooter as imports and new rifles were quite expensive.
The sight is a Parker Hale micrometer sight but I am having trouble in working out exactly which one. It could be contemporary to the 1930s. The CMT-2 came with micrometer sights but they changed the model from time to time. It has a 7 hole disc at the back. The sight as a whole is in fabulous condition.
At some date a gunsmith or metalworker has inletted the sight into the back of the receiver. This is excellent work and provides a really stable platform for the sight, not unlike the later BSA martini target rifles.
Unfortunately this rather screws up the gradations on the sight as it was clearly intended to be mounted lower. However I only need 25 and 50 yards so these are marked on the slide seperately.
The front sight is a Parker Hale tunnel sight which was made from the 1930s to the 1960s. I have all the elements in a brass cap under the forend. This may well be the original CMT-2 sight.
The foreend is Grade 2 teak fitted by Parker Hale but the stock is the original Martini walnut. I have refinished both and stained them so they match, which they did not do when i got the rifle. The finish is 8 coats of Tung oil with 3 layers of wax polish on top. I was very pleased with the finish which is all the same colour and makes the rifle look as one.
Alas all unit markings have been long since sanded from the stock. If only a rifle could talk!!!
On the right side of the receiver, covering the Crown, is a round holder that can hold 10 rounds. This is a useful device which has been properly fitted but I am unsure as to its provenance. It could be pre-war.
The firing pin is modified and sits off centre to the cartridge. Being a rimfire it needs tapping on the rim. The hole in the breech block for th epin to protrude through has been filled and a new hole drilled slightly off centre. I bought a spare .22 pin at Bisley a few months ago but have not so far needed it.
The rifle was inexpensive as single shot .22LRs are not very popular. However I regularly get the shots in a 5 shot group to link up at 25 yards and it is very accurate to use.
If you come across one they are in my opinion worth buying as there is a lot of history there and they are fun to shoot. They will never be as much fun as a 577/450 but a lot cheaper to feed.
Sorry about the attachments, IT is not my strong suit.Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.