Parts source

[gap]

Does anyone have a good source for '03a3 small parts? Specifically, I'm looking for an original stacking swivel screw. I know the screw is peaned and is not supposed to be removed, but the one I have came out without stripping the band (had not read posts on this issue prior to removing said screw!) However, the screw head was buggered up by the previous owner and I'd like to replace it with a fresh one. Thanks.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Dad]

Try Springfield Sporters, the Collector Source or The Amherst Depot.

http://www.ssporters.com/parts/Springfield%201903.htm

Remington blued stock band for the 1903A3 rifle with stacking swivel

03A3 US Rifle Parts and Accessories

D.

[gap]

None of these sights carries the screw only. Any other ideas?????

[Dad]

You can try Numrich.... (Item 55A)

Numrich Gun Parts Corp. - The World's Largest Supplier of Firearms Parts and Accessories

You will probably end up with a repro screw though.

Or you could go all out and get the whole thing as a repro from Sarco....

1903A3 Springfield Stacking Swivel Band


D.

[gap]

Thanks, but not looking for a reproduction. Tried Numrich already, got a reproduction.

Any 1903a3 guys out that can part with a swivel band screw?

---------- Post added at 04:05 PM ---------- Previous post was at 04:04 PM ----------



---------- Post added at 04:10 PM ---------- Previous post was at 04:08 PM ----------

Thanks Mike, tried Bill already. He only has assemblies, and they are not Remington marked in any event.

[Dad]

How about DeChristopher, only problem his minimum order is $25.00 plus $9.00 minimum shipping!

DeChristopherMilitaria.com

item 03-87

D.

[Mike D]

You might want to try Bill Ricca. He doesn't have them listed seperate, because as you know, they were part of an assembly. But it would be worth shooting him an email. His parts are USGI.

Bill Ricca's Home Page