Trigger Housing Hammer Strike Pic Needed

[painter777]

Example needed for fellow member,
Would anyone happen to have a picture of a trigger housing showing a comparison to the Dog Leg Hammer strike VS. a Type III Straight hammer strike?

1 housing showing both types of strikes or 2 housings showing Dogleg strike vs. straight hammer strike.

TIA,
Charlie-painter777

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[usgicollector]

Charlie
I can later tonight
Dave

[painter777]

Thx Dave,
New PC and having trouble figuring out windows 7.
Daughter tired of helping.

Charlie

[davfink]

this is both

[painter777]

D-Fink,
I'm having trouble seeing 2 strikes in your picture.
I know the.....
Dog leg hammer strike will be the far forward strike...
Type III straight hammer strike will be closer to the back.
Just trying to help a forum member.

Thx,

FWIW,
Charlie

[USGI]

Charlie:

I Haven't answered your PM's yet, but just saw the posting with the picture. The one on my S'G' looks farther forward than that - measures about 7/16" from the centerline of the trigger pin to the center of the mark. The pictured mark must be from the straight type hammer. Thanks everyone!

Bob

Oops! I just saw the small caption for Dave's picture, "this is both." Dave's mark is a bit wider than mine, so there must only be a 1/16" or so difference in where the two types of hammers strike?

[painter777]

Whats that ole saying..... Even a blind squirrel finds a nut now and then..
Thanks to D. Fink for the original picture and USGI-Collector Dave for the illustration.
I can now see the 2 raised ridges from the strikes of 2 different hammers.

Regards,
Charlie-painter777

[davfink]

hopefully this is a bit better illustrated
from left
type 3
type3
type3
type 2 and 3 with the dogleg in the front
dogleg only
unmarked


if interested i also have this picture in about 5 times this size as original, i just dont know how to post an uncompressed photo(never mind just figured it out)

[painter777]

Great pics Fink !
That 2nd from left housing makes a nice example of how the hole is oblong shaped on a WRA housing. Where the trigger arm meets the safety.
I'm always surprised at how rough the milling is on WRA parts. You guys have been a big help. You've safed me from digging out the farthest carbine in the safe.
This all came about from a fellow member reading a old post from me when I was IDing my S'G' 1,823,135. The trigger housing on it has only the type III hammer strike but has a 22 coil spring. Hammer is a SG type III. Stu had one close to it in nearly the same configuration. IIRC his also had a type III SG marked hammer with no sign of a Dog leg strike.

Hey JimF4M1s.... this is the table in the basement, that's how I get away with it !

Thx Again Guys,
Charlie

[JimF4M1s (Deceased)]

Hey JimF4M1s.... this is the table in the basement, that's how I get away with it !

Charlie,
I know that, but my wife won't. When I show her the pictures of the S'G' stock, I can tell her it's Ok for me to use her oak table. We'll see how that one goes.

http://i40.photobucket.com/albums/e2...5/DSC00671.jpg[/QUOTE]