Need a stock, anybody got one?

[vintage hunter]

I rescued a 1903 Springfield from a pawn shop some years ago and need the correct stock for it. Bubba sure did a number on this one. The remains have all the earmarks of at one time being a national match. Star gaged bbl., gage# in front of rear sight, ns bolt, rifle sn. on stock & bolt, polished rails, the whole 9 yards. Plus, at some time or another it was drilled/tapped for unertl scope bases. Managed to find everything to restore it except a pre-war springfield C stock. Anybody in forumland have one in good plus condition they'd part with reasonably? To anybody in S.C. I have a Colt model 1909 in descent shape I would consider trading.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Mike D]

I can't help you on the stock (wish I had one myself). I was surprised at your location. I've lived in S.C. for 22 years, and last year was the first time I ever heard of Olar, and I'm less than an hour from you.

Drove through town in less than a minute!

[snell]

While I'm not a big fan of Numrich I just ordered one of their repo "C" stocks and was kinda impressed. I'm putting together a 03A4-gery project using a "sporterized" 03A3 I found in a local gun shop. The action dropped right into the stock, wood to metal fit was good and it came prefinished with a nice oil finish. The NOS hand guard was stained but not oiled (dry as the Sahara) and matched the stock color pretty good. Prices were $180 for stock and $30 for handguard before shipping.
Tang fit picture follows:



Butt plate pic



While not original it sure served my purpose. it may help you as well.

Art

[CapnJohn]

I purchased 2 stocks from Sarco, Inc., Firearms, Firearms Parts and Accessories and they were great.

Their ad:
A 5-year dream finally realized!
We tried for years to get a proper stock made that would drop in your 1903 or 1903A3 Springfield and could not get a producer who could make an acceptable stock.



C-Stocks now on the market take hours and hours of fitting and shaping and have no finish (also if you make a mistake, the stock is lost) – Our stocks are completely drop in and have a delightful finish on the walnut - These stocks will fit on the 1903, 1903A1 and the 1903A3, as we specially designed them that way.

Our first small shipment is in house and available for immediate shipment.

These will also fit on your 1903A4 sniper rifle with small inletting for the bolt handle and is also correct for the national Match rifle.

This stock was standardized in 1928 by the army for all Springfield rifles going forward and was issue on all National Match rifles, but production was limited so all NM rifles got the stock but very few service rifles got equipped.

This stock is the most comfortable stock for shooting your Springfield. Limited Supply

This stock is the crowning touch for your treasured ’03 or A3 SPF276 (stock only)

Stock with new original G.I. 1903 Handguard SPF277

Stock with new original G.I. 1903A3 Handguard SPF278






Original New Unissued G.I. 1903 Springfield Walnut Scant Stocks

[Stillwater]

As I said in another post, I just ordered two "C" stocks, with handguards, which are billed as being unissued original stocks.

I was email notified yesterday morning, that the stocks had been shipped. We'll see how original and unissued they are, when they get here. However, there is a big several state wide storm, between me and them. So, it seems like it will be a week or more to get them.

Bill

[vintage hunter]

Stillwater, when your stocks arive post some pics, i'm quite interested to see what you have. I bought one of the Sarco stocks awhile back for another project. Unless yours is different from mine Capnjohn, it's a WALNUT STAINED chinese knockoff Not sure as to what kind of wood it is but it's not American walnut. Too light in color. It's not a drop in fit like they claim either, had to do a lot of inletting to get the magazine box to fit up to the bottom of the reciever like it should. The stain will come right off first time you rub it with BLO. Think i'll hold out for a genuine pre- war springfield. I know where two are but the guy wants $650 apiece for just the bare stock.

[Stillwater]

Stillwater, when your stocks arive post some pics, i'm quite interested to see what you have. I bought one of the Sarco stocks awhile back for another project. Unless yours is different from mine Capnjohn, it's a WALNUT STAINED chinese knockoff Not sure as to what kind of wood it is but it's not American walnut. Too light in color. It's not a drop in fit like they claim either, had to do a lot of inletting to get the magazine box to fit up to the bottom of the reciever like it should. The stain will come right off first time you rub it with BLO. Think i'll hold out for a genuine pre- war springfield. I know where two are but the guy wants $650 apiece for just the bare stock.

I got my "C" stocks from Numrich, which said they were "original "C" stocks," not reproductions, in unissued condition.

Numrich also had some reproduction "C" stocks, "listed as reproduction stocks", at a lesser price, on their web Site.

I have United Parcel Service tracking on my stocks and they say they will be here friday. We'll see what they are then.

$650.00 apiece for New unissued Springfield "C" stocks, is a blatant ripoff...

Look at this:

http://www.gunpartscorp.com/catalog/...gfield+C+stock

917750

U.S. MILITARY

SPRINGFIELD 1903, SPRINGFIELD 1903A1, SPRINGFIELD 1903A3

Stock, Type C Full Grip, Unissued

$238.65

Follow the URL and go to part number 917750... Call them and check them out. You will want the handguard which is about another $30.00...

Bill

Edited to add:

Buyer beware...!

The above description of the stocks I ordered, isn't what was delivered to me. From the above description, it makes you think you're getting a real Springfield stock, not an aftermarket stock that still needed final inletting and finishing.

The stock I received was not what I expected, even after I questioned the order taker very closely. I was assured the stock I was buying was an original, unissued, US Military Springfield stock. Which it obviously was not.

I'm still quiet angry over the deception, so I had better quit saying things, before I start using some unwanted adjectives.

Bill

[Bakermark65]

Stillwater,

I also ordered one, actually after reading your post. It arrived yesterday. I have to say, I should have known better, but I don't, because I asked about any cartouches or other markings on the stocks. I was quite surprised with the condition of the stock when it arrived.
I'm guessing that maybe you know mor than I, but it looks authentic, and it looks quite old. Actually, it looks like there was at one time a label stuck to it that had been partially removed, and it is quite stained. The staining probably won't be removable as it looks quite deep, and moldy. Is this the same condition that yours arrived in?

I just got off the phone, and the woman told me that the condition was clearly listed on the website. I asked if I returned this one, could I get another, and she stated that they probably sent the best of the bunch(3 left) and there's no guarantee that it will arrive in any better conditon then the one I have. I may just return it.

I am trying to get my rifle back to what it wshould look like. Although it is an authentic 03A4, isomeone at some point polished the crap out of the barrel, and it's value is diminished, but to me, I'd like to get it lookin glike it did back in "the day". I may just get a repro stock and handguard and go that row.

Have you returned the ones you ordered, and what was there condition?

Thoughts?

[Stillwater]

Stillwater,

I also ordered one, actually after reading your post. It arrived yesterday. I have to say, I should have known better, but I don't, because I asked about any cartouches or other markings on the stocks. I was quite surprised with the condition of the stock when it arrived.

I'm guessing that maybe you know mor than I, but it looks authentic, and it looks quite old. Actually, it looks like there was at one time a label stuck to it that had been partially removed, and it is quite stained. The staining probably won't be removable as it looks quite deep, and moldy. Is this the same condition that yours arrived in?

NO, that isn't th condition of the stock I ordered.

The stock that was sent to me was an unfinished replacement stock, not an unissued stock, and it was in poor condition.

I just got off the phone, and the woman told me that the condition was clearly listed on the website. I asked if I returned this one, could I get another, and she stated that they probably sent the best of the bunch(3 left) and there's no guarantee that it will arrive in any better conditon then the one I have. I may just return it.

I returned what they sent me, which is not what I ordered...

I am trying to get my rifle back to what it should look like. Although it is an authentic 03A4, isomeone at some point polished the crap out of the barrel, and it's value is diminished, but to me, I'd like to get it looking like it did back in "the day". I may just get a repro stock and handguard and go that row.

That looks like what I will have to do, and keep my eyes open for a good "C" stock.

Have you returned the ones you ordered, and what was there condition?

Thoughts?

Yes, I returned the stocks I ordered because they weren't what the order taker told me they were. I asked for unissued stocks and I got unfinished stocks...

Bill