Parker Hale T4 barrel on a No4 Mk2 action

[8udr]

I have picked up a No4 Mk2 action barrelled with a 7.62 Parker Hale T4 barrel. I know these are quite common especially on the UK. A problem I have encountered is the mount for the foresight, The barrel is tapped for what I assume is a wedge shaped mount and the holes are .55 inches apart. Does any one know where I could pick up the right part I have a Parker Hale foresight to suit.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[XL39E1]

Try fultons at Bisley, they will have a few in a drawer!