+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: P14 Eddystone - Strange Markings

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member hatrick's Avatar
    Join Date
    Sep 2008
    Last On
    06-08-2025 @ 05:10 PM
    Location
    Massachusets, USA
    Posts
    144
    Local Date
    06-12-2025
    Local Time
    04:00 AM

    P14 Eddystone - Strange Markings

    I just picked up a really early, unconverted/unmodified Eddystone P14 (serial number 10xxx) and it has a few strange stamps on it I was hoping someone can help me out with. Everything on it seems to be Eddystone marked with the typical "E" but the trigger has a strange E inside of a triangle where the normal E would be stamped. Also, the sear and the side of the front sight have a weird E or flat bottomed W. Also, on the side of the receiver rail there is a strange stamp where the normal Broad Arrow would be. Here are some pics.







    The only thing it is missing is the front volley sight arm, screw and washer. Any idea where to get the correct front volley sight parts??

    Thanks,
    Eric
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Legacy Member stevesmle's Avatar
    Join Date
    Feb 2012
    Last On
    10-17-2020 @ 08:56 AM
    Location
    shropshire uk
    Posts
    39
    Local Date
    06-12-2025
    Local Time
    08:00 AM

    strange markings?

    The marking between the EY and the Proofmark is a cancellation stamp, but what it is cancelling I can,t make out.

  3. #3
    Legacy Member hatrick's Avatar
    Join Date
    Sep 2008
    Last On
    06-08-2025 @ 05:10 PM
    Location
    Massachusets, USA
    Posts
    144
    Local Date
    06-12-2025
    Local Time
    04:00 AM
    Thread Starter
    Typically that is where the Broad Arrow stamp is but the marking does not look to be an overstamp and I don't see any remnants of a Broad Arrow.

    Eric

  4. #4
    Legacy Member hatrick's Avatar
    Join Date
    Sep 2008
    Last On
    06-08-2025 @ 05:10 PM
    Location
    Massachusets, USA
    Posts
    144
    Local Date
    06-12-2025
    Local Time
    04:00 AM
    Thread Starter
    Here are more pics of the rifle. The bolt is not matching buy is an Eddystone bolt and is also EY marked. Also, the rear volley sight was not removed but the arm at some point has snapped off. I have an Eddystone replacement arm on the way.

    Eric













  5. #5
    Contributing Member Promo's Avatar
    Join Date
    Oct 2009
    Last On
    @
    Location
    Europe
    Posts
    1,889
    Local Date
    06-12-2025
    Local Time
    10:00 AM
    Check the top of the sight ladder on the back, there should be the S/N aswell.

  6. #6
    Legacy Member hatrick's Avatar
    Join Date
    Sep 2008
    Last On
    06-08-2025 @ 05:10 PM
    Location
    Massachusets, USA
    Posts
    144
    Local Date
    06-12-2025
    Local Time
    04:00 AM
    Thread Starter
    The sight ladder serial number matches the receiver as does the barrel number. The barrel is dated 1916 and it is a non-import rifle. The bore is about as perfect as it gets.

    Eric

  7. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    303Nut's Avatar
    Join Date
    Dec 2006
    Last On
    08-07-2017 @ 04:30 PM
    Location
    North Carolina
    Posts
    95
    Local Date
    06-12-2025
    Local Time
    04:00 AM
    That is really nice. How does it shoot?

  8. #8
    Legacy Member stevesmle's Avatar
    Join Date
    Feb 2012
    Last On
    10-17-2020 @ 08:56 AM
    Location
    shropshire uk
    Posts
    39
    Local Date
    06-12-2025
    Local Time
    08:00 AM
    the E markings were applied by the manufacturer , but all the other markings were stamped by Britishicon inspectors or viewers, the Broard Arrow was an acceptance stamp, so maybe this rifle did not pass final acceptance, and something else was stamped in place of the Arrow. I know problems were encountered with the inspectors failing large quantities of these rifles, and so the British sent over a couple of trouble shooters to try to iron out these problems, maybe this rifle was re-inspected, passed, and the original marking cancelled, as this is a definate British cancellation stamp.

  9. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    mannparks's Avatar
    Join Date
    Sep 2011
    Last On
    07-28-2017 @ 10:36 PM
    Location
    IOWA
    Posts
    220
    Local Date
    06-12-2025
    Local Time
    03:00 AM
    thats a realy nice early E. good luck with finding volly sights,that will be a task.
    as for the EY marks,i think some one got a little stamp nuts. i have a 14 w/volly sights but bubba sanded the stock w/ a belt sander w/ #80 grit. hard to get it all.---charles

  10. #10
    Legacy Member gsimmons's Avatar
    Join Date
    Aug 2010
    Last On
    06-08-2025 @ 01:16 PM
    Location
    Western North Carolina
    Posts
    1,368
    Local Date
    06-12-2025
    Local Time
    03:00 AM
    EY is emergency use. It's a military mark found on a lot of P14's and grenade launching SMLE's. That's why you see the cancelled marks. Use ball in emergency only. I don't know why. It doesn't mean the rifle is unsafe, that would be ZF or DP. Ian Skennertonicon's "Lee Enfield Story" covers most of the abbreviations.



+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Strange Eddystone M1917 conversion
    By Promo in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 10
    Last Post: 06-28-2011, 04:19 AM
  2. Strange Ammo
    By Joemac in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 04-13-2010, 12:53 AM
  3. Strange .22 mag
    By tcart74 in forum .22 Smallbore
    Replies: 1
    Last Post: 09-30-2009, 02:46 PM
  4. Strange US&S markings
    By emmagee1917 in forum 1911/1911A1 Service Pistol
    Replies: 21
    Last Post: 08-26-2009, 01:30 PM
  5. Strange 1903
    By Lt1 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 6
    Last Post: 04-25-2009, 10:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts