How is the "Tool Sight Line No. 2" used?Attachment 30919Information
![]()
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.
How is the "Tool Sight Line No. 2" used?Attachment 30919Information
![]()
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.
I have got a funny feeling that it was used to centralise the old windage-left/right adjustable backsight cap when the backsight assembly was modified by rivetting the cap to the leaf. All of the old ex-adjustable ones I ever encountered on DP's, EY's and in service with School Cadet corps had the cap and leaf rivetted together. But I could be wrong
To re-line the windgauge or cap of the backsight of rifles No.1:-
The tool, sight line, and scriber will be used in the following manner and as shewn
First re-brown the windgauge, assemble it to the No.1 “A” sight leaf, and adjust it to its central position, i.e., with the original top centre line (now browned over, but visible) in correct alignment with the centre line on the leaf, and with the windgauge screw spring engaged in a notch in the screw-head. Next place the sight line tool over the windgauge and leaf, and see if the lines on the windgauge are in correct alignment with the tool; reverse the tool to verify. Then, with the scriber (which should not be too sharp), trace over to brighten the lines at the front and top of the windgauge, reversing the tool as necessary.
The above instructions, so far as they apply, will be followed when re-lining the fixed cap of the No. 1 “B” leaf.
Not bad from memory though was I?
C'mon Pete, you've been wearing those constrictive caps you mentioned for to long.
Or sucking on the red wine and destroying braincells.![]()
Last edited by muffett.2008; 02-13-2012 at 04:39 PM.
Yep, it's about time we took Australiaback and taught you wild colonials a lesson. And while we're about it, We'll take NZ back too! I'm fed up with all this cheek from them. I'll get a gunboat sorted out after lunch.............. I've always wanted to shell Rockhampton into oblivion followed by Canungra
won't stop you on that one Peter. take Shoalwater as well please!!!
You will then be welcome in West Australia, where the sun sets!!!
cheers
Ned
Still got that flingy thingy to repel borders if you Rocky guys need it. You Kiwis will have to build your own.
Got my first taste of sandflies and midges at Shoalwater Bay - or rather, they got their first taste of me! I had to go to the CRS the next day and the MO told me it was because they could smell the tasty meat of a pom! I was eaten alive but after a few weeks I just tasted and smelled like the rest of the nashos. Anyway, Shoalwater is in for a shelling too!