+ Reply to Thread
Results 1 to 4 of 4

Thread: How sportered is my Enfield?

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Matt_mg's Avatar
    Join Date
    Jun 2007
    Last On
    04-23-2009 @ 08:11 PM
    Location
    Montreal, QC
    Posts
    3
    Local Date
    06-16-2024
    Local Time
    10:28 AM

    How sportered is my Enfield?



    Sorry for the bad second picture. It's obviously missing wood and there are no markings on the stock.

    Left side of the receiver is as is:
    N4 Mk1 (F) FTR
    /49 BS117**
    Bolt and receiver have the same number, the mag's numbers are X'ed out and replaced with the same numbers as the receiver and bolt.

    Right side has "Englandicon" stamped on it.

    The rear sight is a micrometer sight with a F stamped in the upper left. The rifle has the half-cock (I discovered that the hard way, I'm an Enfield noob and I thought I had seized up the rifle thanks to this website I got the 1942 small arms manual and promptly slapped myself.), the cocking piece has grooves on it.



    I'll get some proper macro pics if someone is interested. I'm wondering about the (F), I haven't seen it mentioned but I'm probably not looking hard enough in here .
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Moderator
    (Lee Enfield Forums)
    No4Mk1(T)'s Avatar
    Join Date
    Oct 2006
    Last On
    09-26-2021 @ 09:58 AM
    Location
    Vancouver Island
    Posts
    407
    Local Date
    06-16-2024
    Local Time
    07:28 AM
    Short answer is your rifle is at least easily restorable. From the looks of things you still have the bayonet lug so the rest is just fitting a new forarm, hand guards with barrel bands and possibly a new butt stock depending on who badly sanded the one you have is. If they reused the original serial number during the FTR then I believe your rifle started life as a ROF Maltby. The (F) is for ROF Fazakerly, the facility where in 1949 the FTR was done. Look in the MKLicon at any of the No.4 rifles and you will have an idea what it should look like when finished (assuming that is what you want to do with the rifle.)

  3. Thank You to No4Mk1(T) For This Useful Post:


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Gary D's Avatar
    Join Date
    Nov 2007
    Last On
    03-08-2019 @ 02:46 PM
    Posts
    43
    Local Date
    06-16-2024
    Local Time
    08:28 AM
    Looks identical to the '43 Long Branch I just picked up. Still has the Bayonet lugs and sight guard in place, which means a new set of wood and bands and she's ready to go. Keep in mind that you will likely need to do some bedding to make it shoot properly with new wood.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Matt_mg's Avatar
    Join Date
    Jun 2007
    Last On
    04-23-2009 @ 08:11 PM
    Location
    Montreal, QC
    Posts
    3
    Local Date
    06-16-2024
    Local Time
    10:28 AM
    Thread Starter
    Thanks, it answers my questions. I'll get around to it when I have more money to spend on Milsurps (the eternal problem)

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts