Lee Enfield No 4 Mk 1/2 1942

[shaunman79]

Hi guys I bought this Lee Enfield yesterday maybe you guys can give me an idea of what it is worth and is it a possible candidate for milsurp resto? thanks guys pictures included.

lee enfield | Flickr - Photo Sharing!
lee enfield | Flickr - Photo Sharing!
lee enfield | Flickr - Photo Sharing!
lee enfield | Flickr - Photo Sharing!
lee enfield | Flickr - Photo Sharing!
lee enfield | Flickr - Photo Sharing!

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[HOOKED ON HISTORY]

BDL LTD can probably provide the timber and perhaps even the small bits. Working on a similarly molested No1 Mk3. Very rewarding project. See my Lithgow No 1 Mk 3 forend post to see just how helpful the folks here are if you find yourself with questions during the process.

[shaunman79]

Check its a 1944 not a 42

[NRA]

yup talk with Brian

[hunterinthewoods]

I have a few of those ( cut barrel ), and they can make a nice full wood shooter. I returned one to full wood, and the other is getting a L42A1 treatment.
Unfortunately the barrel has been cut on yours and it will never truly be able to be fully restored. Its is up to you, what you want to do. I did mine for myself, not for how much it would be worth in the end. I am sure my full beech wood resto cost me more in the end that what it is worth. Doesnt bother me, I do enjoy working on and shooting these.

The sporter you have there goes for $125 - $150ish . But like I said if you love these rifles , put a few dollars and some work into the project. Shoot it and enjoy it.

Be warned, these critters are very addictive!! You will spend countless hours scouring the web for elusive parts, draining your wallet and rubbing on some BLO!!

[breakeyp]

Short barrels can be returned by sleeving a portion of a new barrel with bayonet lugs, etc. onto the old barrel with the seam located under the front sight ears or handguards. The new barrel is free bored. I did have one done where the gunsmith actually lined up the rifling with the original barrel before soldering it in place. It looks like the barrel is ringed but it is now complete. For years I would buy any cut off barrel ends for just such an event. And no I don't have any left.

[flygrimm]

If you can wait for a few more months, Criteriion will have barrels for the No. 4. Not necessairly 'original', but it will be shootable. I sent them a couple of my barrels to help out with measurements. It's been quite a while now, so hopefully they will be available soon.

Stuart

[Clash77]

I believe there are a few places that have No.4 barrels available still too

[shaunman79]

Well guys I went to a gun show today looking for parts and found this rifle I think I am just going to sell the sporter I found a 1944 canadian made no4 longbranch made not too far from where i live in canada kind of cool!, has the original sling the bolt matches the mag doesnt other than that i think its all original ww2 issued what do you guys think? I really like the stock on it i seen it sitting at the guys table from 10 feet away he was an old french guy he said it was the last one and he just sold 3 and told me its canadian issue i looked at it for a minute while to other guys were wating for me to put it down as I said ill take it! one more for the wall, heres some pics let me know what you guys think? thanks for the info you guys are great and I appreciate your help when I need it.

Attachment 36567Attachment 36558Attachment 36566Attachment 36565Attachment 36564Attachment 36563Attachment 36562Attachment 36561Attachment 36560Attachment 36559Attachment 36557Attachment 36556Attachment 36568Attachment 36569Attachment 36570Attachment 36571Attachment 36572Attachment 36573Attachment 36574Attachment 36575Attachment 36576Attachment 36577Attachment 36578Attachment 36579

[teleman]

I have a 1945 LE Sporterized #4 and your pics are the only others I've seen with the wood dots on the forearm under the receiver.