+ Reply to Thread
Results 1 to 6 of 6

Thread: R.F.I. NoI Mk3* 1972 dated.

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    05-14-2025 @ 01:11 PM
    Location
    Cardiff Wales UK
    Posts
    474
    Real Name
    Paul Ellis
    Local Date
    06-10-2025
    Local Time
    11:27 PM

    R.F.I. NoI Mk3* 1972 dated.

    This is a "Brand New" still in its original grease No1 Mk3* RFI rifle in grenade launching guise. It is not mine but belongs to a friend who kindly allowing me to photgraph it. It has yet to go for proof but it is thought that the rear wire binding will have to be removed to allow the barrel to have proof marks applied. I was under the impression that these were last made in 1970 but as you can see this one is marked 1972. I just love the bolt through the forend, nothing pretty just very practical..........


    Attachment 39919Attachment 39921Attachment 39922Attachment 39923Attachment 39924Attachment 39925Attachment 39926Attachment 39927
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by Buccaneer; 01-21-2013 at 04:23 PM.

  2. The Following 4 Members Say Thank You to Buccaneer For This Useful Post:


  3. #2
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    06-07-2025 @ 01:20 PM
    Posts
    1,150
    Local Date
    06-10-2025
    Local Time
    11:27 PM
    I don't think you need to remove the binding for proof - they have done hundreds of these rifles without any such requirement. I don't have any of my wire-wraps to hand to check, but the Proof Houses obviously either use a small stamp on the rear of the barrel, or make some kind of an exception where the barrel is inaccessible.

  4. Thank You to Thunderbox For This Useful Post:


  5. #3
    Contributing Member
    Buccaneer's Avatar
    Join Date
    Mar 2011
    Last On
    05-14-2025 @ 01:11 PM
    Location
    Cardiff Wales UK
    Posts
    474
    Real Name
    Paul Ellis
    Local Date
    06-10-2025
    Local Time
    11:27 PM
    Thread Starter
    Quote Originally Posted by Thunderbox View Post
    I don't think you need to remove the binding for proof - they have done hundreds of these rifles without any such requirement. I don't have any of my wire-wraps to hand to check, but the Proof Houses obviously either use a small stamp on the rear of the barrel, or make some kind of an exception where the barrel is inaccessible.
    On a recent visit to the Birmingham Proof House I confirmed that they are quite happy to stamp the barrel on the exposed section just behind the rear sight so no unwrapping required. For those in the UKicon if you get a chance to visit the proof house do so it is well worth it, the tour takes about three hours and costs £150 for a maximum of ten people so it won't break the bank, the proof house is 200 years old this year and they are still using the same buildings, a visit is the next best thing to time travel ...............

  6. Thank You to Buccaneer For This Useful Post:


  7. #4
    Legacy Member Simon P's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 06:24 AM
    Location
    Essex. UK.
    Posts
    645
    Real Name
    Simon Pemberton
    Local Date
    06-10-2025
    Local Time
    11:27 PM
    Quote Originally Posted by Buccaneer View Post
    For those in the UKicon if you get a chance to visit the proof house do so it is well worth it, the tour takes about three hours and costs £150 for a maximum of ten people so it won't break the bank, the proof house is 200 years old this year and they are still using the same buildings, a visit is the next best thing to time travel ...............
    I went there recently with the HBSA, they also have a small museum of firearms & rare ammunition, plus the area where they reload all the proof ammunition is interesting as well. Well worth a visit.
    Regards Simon

  8. #5
    Legacy Member HOOKED ON HISTORY's Avatar
    Join Date
    Mar 2011
    Last On
    Today @ 05:53 PM
    Location
    MS/USA
    Posts
    4,089
    Local Date
    06-10-2025
    Local Time
    05:27 PM
    Attachment 41084 Picked up his older brother this week end. Glad to add this odd creature to my Enfield collection. Having seen this post earlier helped me to recognise what I was looking at.

  9. #6
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    06-06-2025 @ 12:18 PM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,667
    Real Name
    Peter Laidler
    Local Date
    06-10-2025
    Local Time
    11:27 PM
    We were still refurbishing these as UKicon War Reserve stocks in 1970. Including stripping down, greasing and re-binding. I seem to remember that we only had one cup discharger to test them with (not live firing....., just the fit of the cup) but they all went back into Mobilisation Stores afterwards

+ Reply to Thread

Similar Threads

  1. W.R.A. 30 Caliber Dated 44
    By Hooks in forum M1/M2 Carbine
    Replies: 7
    Last Post: 07-28-2010, 11:46 AM
  2. 1945 dated BSA No.4's
    By Lance in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 08-23-2009, 02:58 PM
  3. DWM M98 dated 1917
    By jisii in forum Mauser Rifles
    Replies: 10
    Last Post: 07-05-2009, 03:52 PM
  4. M1 '42 Dated Barrel Value?
    By Tom T in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 03-12-2009, 09:29 AM
  5. Are Savage No.4 K.I*s dated?
    By Admiral Fishwich in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 10-13-2007, 10:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts