7.92x33

[Klunk]

Any sites on loads/dimensions/components for this cal?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Missing Something]

For case dimensions check out... www. reloadbench.com, they have a case drawing for it.
As for load I used Hornady 125gr .323" (8mm) fmj with 22gr of IMR 4198. I was also using re-sized .308 brass but you can now get commercially made brass, the proper size,

**disclaimer****
Use load data at own risk.