Inherited an M1 Garand and it might be an original 1941?

[Boomerstud]

Hello,
I inherited an M1 Garand and from the various serial numbers, SN 279901 trigger, hammer, bolt, op rod, check out as 1941-43 parts, receiver number D28291-9 SA with barrel number D35448-7 Rep-16 which seems to mean it comes from around 41-43. Am I in the ball park?

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

Welcome to the forum...we can be much more specific that that. I think 1941 is correct and someone will be along to tell you what month it was made. If you take a few pics we can help you more with details...

[Prince Humperdink]

Made in July of 1941.What a great thing to inherit!

[Boomerstud]

Thanks for the info. I was pretty excited when I started to research the serial numbers of the various parts. From the vague information I have gleaned, this gun was owned by my wife's grandfather and he may have brought it home with him at the end of WWII. I have it apart now ready to clean as it is in great shape, but in much need of cleaning as the grease use has hardened a bit. It has the patch/cartouche S.A - S.H.M on stock with of course the cannons and the "P." Thanks again.

[latigo 1]

Thanks for the info. I was pretty excited when I started to research the serial numbers of the various parts. From the vague information I have gleaned, this gun was owned by my wife's grandfather and he may have brought it home with him at the end of WWII. I have it apart now ready to clean as it is in great shape, but in much need of cleaning as the grease use has hardened a bit. It has the patch/cartouche S.A - S.H.M on stock with of course the cannons and the "P." Thanks again.

The SA / SHM is a rebuild cartouche, not used on original rifles. Barrel drawing number shows it could be original. Need more information to determine anything else.

[browningautorifle]

cartouche S.A - S.H.M on stock with of course the cannons and the "P."

I should think it should be GHS/SA. I had one...mine was a Lend Lease though. There's a tutorial to put pics on here. If you can't figure it right now, see your PMs and I'll give you an Email. Send me the pics and I'll put them up...

[Boomerstud]

Thanks. How do I get the pictures from my phone to this website. I am old, but can learn new tricks - ha.

[Joe W]

Hello,
I inherited an M1 Garand and from the various serial numbers, SN 279901 trigger, hammer, bolt, op rod, check out as 1941-43 parts, receiver number D28291-9 SA with barrel number D35448-7 Rep-16 which seems to mean it comes from around 41-43. Am I in the ball park?

You should be able to see the date of barrel manufacture on the side of the barrel. It should be close to S-A-6-41 upside down.
Does the rear sight Windage knob look like this ? It should if original to a 1941 built rifle.

[Boomerstud]

Well, my wind gauge has a bar across the front with a screw in the middle. It does have the left and right under the bar. Here are the SN numbers when I finally got the nerve to take it apart and find them; SN is 279901, Trigger housing is D28290-12 SA, Hammer is C46008-5 SA, Bolt is D28287-12 SA W9B, Operating rod is D35382-1 SA, Receiver is D28291-9 SA with RE 1 stamped over top of number and "&" near the end of the number. Barrel is D35448-7 Rep-16. I will try and get some pictures on here as soon as I figure out how to do so. Thanks for the help.

---------- Post added at 02:19 PM ---------- Previous post was at 02:11 PM ----------

Nope, it is a S.A. - S.H.M. What is a PM? If that is personal email it is boomersusan@msn.com. I will dissemble and take some pictures. Finally got the nerve, and after watching several videos, gave it a try. Had a little problem with the op rod and I at first put in the spring upside down, but finally figured out what I had done wrong and got it back together.

[Boomerstud]

Jim, I have taken pictures of the serial numbers and am ready to send them to you when I get your email address. Thanks.