Security Forces SKS

[echo1]

Hi All,

Not really a C&R, but is a milsurp collector of sorts.

This is what came my way, and what I did within the 1st hour. As I've said else where, it's missing the receiver cover and stock, left side arsenal [0141], serial number followed by "KFS ATL GA", right side the 2 CPSF Chinese characters.

Started off putting it in a Timbersmith Monty, replaced cover mount with an un-numbered one. Fits great, looks good. Stepped back and thought about it.

So it's an "All matching but..." SF Bubba. Since I'll never get rid of it, I'm going to continue down the path of non permanent tinkering, for a range rifle. It's far too heavy to slug around in the field, and too nice to jolt around as a truck gun. The FSB is coming off complete, to be replaced by one that's had the bayo lug and rod guides neutered then re-blued. Here's some crappy pictures. It is what it is and I'm happy as could be. PAX

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Flying10uk]

Is it aftermarket woodwork?

[echo1]

Is it aftermarket woodwork?

Timbersmith Monte Carlo. PAX