SKS stock question?

[winston94]

hello,

found this stock... i assume it is a Chinese sks stock but not for sure... the sling swivel is on bottom with a cutout on the side as well... is this normal or did someone modify and is it Chinese or some other maker?

Attachment 76957

thanks,
Mike

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Flying10uk]

Here is my Chinese SKS which is U.K. deactivated spec. As can be seen there is no cut-out on the side of the stock but I don't know if all Chinese examples are the same as mine.

[Sentryduty]

Yooper John's website makes specific mention of dual sling swivel mountings, the side cutouts were typically either Albanian, or post 1959 Chinese, however this note is of valid reference:

China used both swivels during production so later guns also had bottom swivels. Rebuilds could be either.

Yooper John's Gun Information

---------- Post added at 12:43 PM ---------- Previous post was at 12:40 PM ----------

Here is my Chinese SKS which is U.K. deactivated spec. As can be seen there is no cut-out on the side of the stock but I don't know if all Chinese examples are the same as mine.

Yours looks like a Factory 306, a better image of the stamping could better ID a year.

[browningautorifle]

Make it easier...

[Sentryduty]

Make it easier...

Thanks Jim, yooper's site has good information but has so many protections and no with direct link able pages makes referencing difficult. I didn't quite have the time to grab a screen cap and upload when I posted.

[browningautorifle]

yooper's site has good information but has so many protections and no with direct link able pages

I got the pic off Google. Then it led me directly to Yooper.

[winston94]

ok thanks all...

[Flying10uk]

The impression that I got of my Chinese SKS is that it is surprisingly well made. However, whatever wood was chosen for the stock seemed, in my opinion, a little on the soft side.

[Sentryduty]

The impression that I got of my Chinese SKS is that it is surprisingly well made. However, whatever wood was chosen for the stock seemed, in my opinion, a little on the soft side.

Both of those impressions match my own. About a decade ago we had an absolute glut of new production "Norinco" civilian SKS's, they were identical to the military production guns aside from date of mfg, and sold for $130. I handled a number and shot a few, and they worked just as well as any other SKS produced. The stocks are of a softer type wood than one is usually accustomed to, since I am no international arbourist I can't guess, however an internet search for the topic reveals lots of speculation. The wood in most Norinco products are a little on the soft side in my experience and remind me of working with Poplar, the "soft" hardwood.

[Flying10uk]

Is this the stamps you mentioned in relation to the date? I have tried to sharpen it up with the picture editor on my computer.